Intake Tube Set for C-360

Product No. PR11760

Intake Tube, Strainer/Outlet Tube, Elbow and Diffuser for C-360.

Quantity:

4.94

Buy Now
Rated 5 out of 5 by from Great set of intake / output heard tubes It's always nice to have an extra hard part of the tubing set. These hold tight to the glass and are square so as to not take up too much height. This size is for 1/2 ID Tubing just put the right size snap clamp at each end of the hose and your all set
Date published: 2016-10-10
Rated 5 out of 5 by from c360 intake and output These are made very well. They dont leak. And the output creates great water flow.
Date published: 2015-12-21
Rated 5 out of 5 by from Awesome Love this tube set! Very dependable and durable! Yep.
Date published: 2015-10-30
Rated 5 out of 5 by from Great Parts Great part; after my tank was out of business for more than 4 years it needed parts to get it up and running smooth and quiet again. This part was bought more for cosmetic reasons, it replaced a rather dirty and damaged part.
Date published: 2015-08-18
Rated 5 out of 5 by from great replacements I needed to replace my outlet line and this product was spot on and worked great.
Date published: 2015-04-11
Rated 5 out of 5 by from Simple and straight forward. Exactly what I needed. I actually purchased these for a second intake tube to use for output, as I am using my pump with a turtle tank and the low water level meant that the outflow would splatter everywhere. This allowed for the water to pump out closer to water level.
Date published: 2015-01-14
Rated 5 out of 5 by from Perfect replacements My old ones were getting a little crusty and these where perfect replacements and makes it look like brand new again.
Date published: 2014-04-24
Rated 3 out of 5 by from Intake length can't be shortenrd The intake tube length can't be shortened. There seems to be a design flaw in the way the intake screen attaches to the down tube. The flare is on the down tube instead of on the screen. Cutting the down tube to length will eliminate the flare thus making it inpossible to attach the intake screen. The only alternative would be to cut the down tube shorter and add a short length of flexible hose to attach the flare to the cut down tube so th intake screen can then be re-attached. This takes away from the clean seamless look inside the aquarium. Not a thought out design!
Date published: 2014-04-11
  • y_2019, m_1, d_22, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_PR11760, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getReviews, 10ms
  • REVIEWS, PRODUCT