Looking to install a "48" inch light fixture into a canopy. Actual fixture size is 47.25 inches. Will it fit the 48 inch canopy?
The interior is 48.875" long.
Date published: 2016-03-02
What are the dimensions of the cabinet
That depends on which size you are interested in buying or what size aquarium you own.
Date published: 2016-03-01
What is the height of the Majesty base unit What is the height of the Majesty canopy unit
Thank you for your inquiry. The Majesty stand is 28" high, and the canopy is 8.5" tall.
Date published: 2016-02-24
72 x24 do you make this canopy for my majesty stand
Unfortunately, no, we do not make a wooden canopy of this size.
Date published: 2016-03-03
Also looking for the height of Majesty stand for the 120 XH (60X18X26) Aquarium, Thanks
Date published: 2016-02-16
I have a 55 gallon with 48'' advanced led on top and the penguin 350 filter. Will the majesty canopy fit on top or will the led handles that sit on the edge of the tank be in the way?
The handles will probably be in the way, but you can actually remove them and allow the light to lay on your glass canopy. Or some people remove them and re-insert them upside down, then attach the light to the underside of the wooden canopy, depending on what type of tank they have and what their needs are at the time.
Date published: 2016-01-29
Stand design question
I bought a used 65G with a majesty stand. It looks like the aquarium sits on the two ends with no support through the middle? Is the by design? Can you explain how that properly supports the aquarium?
Stands support the pressure points of an aquarium not the entire bottom. Typically, most stands must support the outer edges of a tank as those are the pressure points. It depends on the particular tank though, and style of the stand. All of our stands are tested in many different ways and with dozens of aquariums prior to receiving design approval.
Date published: 2016-07-01
How to level my majestic stand and 75 gallon tank was level, now when full not level, off 1 in side to side
# NV15021 rev A was level now when full it's off side to side almost 1 in.
This is usually a flooring issue. You cannot level the stand as this will be altering it which voids the warranty and also may cause it to not properly support the tank's pressure points. I would recommend sending us some pictures; one of the tank on the stand from a distance, including the floor it is on, and one with a level on top of the tank, showing how off it is, and finally, one showing the tank itself and just the top of the stand so we can see how it is positioned. You might also want one from the end of the tank as well. This will help us to determine what the issue is so we know how to assist you. Please put FOR BREX in the summary line of any email you may send.
Date published: 2016-01-19
Will this stand be adequate for a 125 gallon or should I get a stronger stand?
Yes, of course! We manufacture this style in a 72 x 18 specifically for a 125 gallon tank. It has been tested to provide proper support of the pressure points of a tank.
Date published: 2016-01-18
If I request that my stand be 30 inches high instead of 18 will it be less durable under the water weight of the tank?
I have a hand made stand that is 30" tall and love the height it gives with my 55 gallon but I want to upgrade to a 125 and don't like the 18" stand heights offered.
Any custom stand can be questionable as it is not a proven design. Therefore, it may not support the tank's pressure points properly. I am not sure that the height necessarily has anything to do with it, it is the overall stand design that must be taken into consideration. If you go wtih a custom stand, your warranty is no longer a limited lifetime one, but one year on the tank only.
Date published: 2016-01-18
Can I replace part of my Majesty (perfecto) 44 Hexagon cabinet stand?
The top and bottom surface of my stand have warped from water damage and I'd like to replace those two pieces of wood without replacing the entire cabinet if possible. Do you offer replacement parts on these cabinets?
No, you would need to replace the entire stand. Altering the stand in any way voids warranty, so the only parts we ever have available for any stands are sometimes the door and hinges.
Date published: 2016-01-04
Marineland Majestic Stand, Model 69483
HI we have the above mentioned stand, and we also have a 100 gallon tank, that measures 48" L x 19" W x 24" H. With the tank full, we figure it will weigh about 900 pounds. We were told that the stand will hold the weight as long as we put a sheet of plywood across the top, or put a support piece in the centre. By a support piece, I mean a leg to go under the centre board that goes across the middle. Just want to know if this is right, and can the stand hold the weight of our tank. Thanks.
As that stand is 48 x 24 and I understand you to mean that your tank is 48 x 19, the answer is no, we would not recommend it. It would hold the weight, yes, but not support the pressure points properly. To put a tank of those proportions on this stand would risk it leaking. The addition of the support piece would not help.
Date published: 2015-12-29
Majesty stand center brance
Can this brace be removed with tank filled? I need to install a sump but it won't fit thou the front or back. If i remove 1 of the braces either front or back it will fit but will the tank crack then? Thanks
No, you cannot remove a brace without causing serious damage and voiding your warranty.
Date published: 2015-12-14
what size tank will fit on APF70443
what size tank will fit on APF70443
The number you provided does not match up with anything in our system so I am unable to answer your question, unfortunately. Please call or email directly for further assistance.
Date published: 2015-12-14
Marineland 75g Tank Stand Sturdiness
I recently purchased the Marineland® 75G Aquarium Majesty Ensemble at Pet Smart. Is the stock stand sturdy enough to hold the 75g fish tank at full load (60 pounds of sand, water and decor)? I made sure my stand and tank is leveled with the carpet floor. I'm concerned that there is not enough support to hold the tank. I will be running two c-360 filters with a 250W heater. I am planning to get a Tiger Oscar.
In addition, what will void the warranty. I live in Vancouver BC, Canada.
All of our stands are tested prior to being placed on the market, and are capable of holding 10 lbs per 1 gallon of water, so that stand can hold up to 750 lbs without a problem. Keep in mind your sand, decor, etc, will displace water, so you will not have an actual 75 gallons of water in the tank.
Any alteration of the stand or tank will void all warranty. Drilling holes, removing braces, etc.
Date published: 2015-12-10
How can I order the Majesty wood canopy for 75 gallon tank
Where on your website can I order the Majesty wood canopy for a 75 gallon Marineland tank?
You cannot order it through our website as we do not sell direct. You can purchase it through a local fish store, or there are a few websites that carry our stands: www.drsfostersmith.com, www.amazon.com, www.petswarehouse.com, www.thatpetplace.com.
Date published: 2016-05-17
Do you have to assemble stand?
It comes pre-assembled.
Date published: 2016-07-08
Canopy work with lights?
Does the canopy work with the lights that were provided with the 75gal tank and "majesty" stand from PetSmart? As in, do I just set the canopy on top of the tank, or is there some modification needed to make it fit with the lights?
Also, the PetSmarts in my area don't carry the canopy in the store, are they able to order it?
The canopy just rests on the frame of the tank. Lights should fit under it with no problem. Be sure to use glass canopies to avoid too much condensation.
No, Petsmart cannot special order anything, you would need to have a local fish store order it or buy it online.
Date published: 2015-11-12
What is the height of your Majesty stand for a 125 gallon tank? I have a skimmer that is 24 inches in height and it sits in my sump.
Date published: 2015-11-11
How tall is the stand?
The Black Majesty Stand 84"x24" how tall is it? 30", 36"?
Date published: 2015-11-06
On the stand (48 x 18 for a 75 gallon aquarium) when the doors are open, is there an upright post in the middle or is the entire space open?
There is a center piece, yes.
Date published: 2015-10-07
Can an Aqueon 38 gallon tank fit on the Marineland Majesty 36" by 13" stand?
No, it will not fit our stand.
Date published: 2015-09-08
waterproofing inside cabinet
Just puchased a 150 gal MAJESTY STAND. Can i use some type of water seal to inside of cabinet ( thompson est. )
We have not tested any other brand of sealer over the existing finish, and it is not part of our recommendations for care fo the stand. You would need to do a small test area first, and it might require sanding the fishing to get it to stick.
Date published: 2015-09-01
How much is item#67362
Thank you for your question. However, we do not sell directly to our consumers for this size of a product. You would need to visit a local family run pet store to get a pricing quote in your area.
Date published: 2015-08-19
Weight of canopy
I bought the marineland 55 gal. all glass quarium and majesty stand. I want to buy a canopy, my question is: will the aquarium be able to support the weight of the canopy plus the water and rock decorations plus HOB filters? Isn't it too much weight for the aquarium to bear? Thanks!
Yes, it will be able to bear the weight of the canopy as well; it is not too much for it.
Date published: 2015-08-13
I have the 72" majesty stand. Would it be safe to cut the center section out between the doors on the front?
No, not at all. That would affect the integrity of the stand, and cause major issues.
Date published: 2015-08-11
I just bought a marineland 10 gallon tank, which size stand is used with this tank?
The tank is the MARINELAND® 10 Gallon BioWheel LED Aquarium Kit.
Thanks for the help.
The black Majesty, item 67203, is the only one we make for 10 gallon tanks.
Date published: 2015-08-10
Majesty Dimentios ? help
Hello I'm in need of height dimentions for the majesty 36"x18" stand and canopy
1- height at wich the aquarium sits on stand ?
2- the inner clearance height of the canopy ( will this accommodate the Sophisticated 24 Hour Lighting System Product No. 32980) ?
3-the outer hight of the canopy #how high off the rim does this sit) ?
I have a shelf above my aquarium so my space is limited. any help is much appreciated thanks.
The stand is 28" for the stand. It has a tank cavity depth of .25".
Inner dimensions of the canopy are 36.675 x 18 3/4 x 7.875
Outer height is 8.5".
Date published: 2015-06-26
I'm looking to but the 60x18 black wood canopy to go with my aquarium but was wondering does the back have room for filter tubes, water heater, bubble tubes etc going to tank? Would I have to drill holes? Also does the canopy take away from the tank glass wise? Like when I put it on will it cover any glass cause my aquarium has a black lip. It's a majestic also. Thanks
The Majesty canopy is indeed open in the back for storage, passage of tubing, and electrical cords. Also the canopy does not take away from the glass as it does rest over the top framing only.
Date published: 2015-06-17
36x36 monterey cabinet.
I looked at the 36x36 Monterey cabinet at a local LFS. The side panel slides towards the back, is this correct(they got it to slide)? I would think that it lifts out, otherwise, it would not open due to the back of the stand being against the wall. They did not seem to know much about it. I am concerned because the front brace between the 2 doors would not allow for a sump to be placed into the cabinet.
The side panels are fully removable.
Date published: 2015-05-26