Marineland Majestic Stand, Model 69483
HI we have the above mentioned stand, and we also have a 100 gallon tank, that measures 48" L x 19" W x 24" H. With the tank full, we figure it will weigh about 900 pounds. We were told that the stand will hold the weight as long as we put a sheet of plywood across the top, or put a support piece in the centre. By a support piece, I mean a leg to go under the centre board that goes across the middle. Just want to know if this is right, and can the stand hold the weight of our tank. Thanks.
As that stand is 48 x 24 and I understand you to mean that your tank is 48 x 19, the answer is no, we would not recommend it. It would hold the weight, yes, but not support the pressure points properly. To put a tank of those proportions on this stand would risk it leaking. The addition of the support piece would not help.
Date published: 2015-12-29
Majesty stand center brance
Can this brace be removed with tank filled? I need to install a sump but it won't fit thou the front or back. If i remove 1 of the braces either front or back it will fit but will the tank crack then? Thanks
No, you cannot remove a brace without causing serious damage and voiding your warranty.
Date published: 2015-12-14
what size tank will fit on APF70443
what size tank will fit on APF70443
The number you provided does not match up with anything in our system so I am unable to answer your question, unfortunately. Please call or email directly for further assistance.
Date published: 2015-12-14
Marineland 75g Tank Stand Sturdiness
I recently purchased the Marineland® 75G Aquarium Majesty Ensemble at Pet Smart. Is the stock stand sturdy enough to hold the 75g fish tank at full load (60 pounds of sand, water and decor)? I made sure my stand and tank is leveled with the carpet floor. I'm concerned that there is not enough support to hold the tank. I will be running two c-360 filters with a 250W heater. I am planning to get a Tiger Oscar.
In addition, what will void the warranty. I live in Vancouver BC, Canada.
All of our stands are tested prior to being placed on the market, and are capable of holding 10 lbs per 1 gallon of water, so that stand can hold up to 750 lbs without a problem. Keep in mind your sand, decor, etc, will displace water, so you will not have an actual 75 gallons of water in the tank.
Any alteration of the stand or tank will void all warranty. Drilling holes, removing braces, etc.
Date published: 2015-12-10
How can I order the Majesty wood canopy for 75 gallon tank
Where on your website can I order the Majesty wood canopy for a 75 gallon Marineland tank?
You cannot order it through our website as we do not sell direct. You can purchase it through a local fish store, or there are a few websites that carry our stands: www.drsfostersmith.com, www.amazon.com, www.petswarehouse.com, www.thatpetplace.com.
Date published: 2016-05-17
Do you have to assemble stand?
It comes pre-assembled.
Date published: 2016-07-08
Canopy work with lights?
Does the canopy work with the lights that were provided with the 75gal tank and "majesty" stand from PetSmart? As in, do I just set the canopy on top of the tank, or is there some modification needed to make it fit with the lights?
Also, the PetSmarts in my area don't carry the canopy in the store, are they able to order it?
The canopy just rests on the frame of the tank. Lights should fit under it with no problem. Be sure to use glass canopies to avoid too much condensation.
No, Petsmart cannot special order anything, you would need to have a local fish store order it or buy it online.
Date published: 2015-11-12
What is the height of your Majesty stand for a 125 gallon tank? I have a skimmer that is 24 inches in height and it sits in my sump.
Date published: 2015-11-11
How tall is the stand?
The Black Majesty Stand 84"x24" how tall is it? 30", 36"?
Date published: 2015-11-06
On the stand (48 x 18 for a 75 gallon aquarium) when the doors are open, is there an upright post in the middle or is the entire space open?
There is a center piece, yes.
Date published: 2015-10-07
Can an Aqueon 38 gallon tank fit on the Marineland Majesty 36" by 13" stand?
No, it will not fit our stand.
Date published: 2015-09-08
waterproofing inside cabinet
Just puchased a 150 gal MAJESTY STAND. Can i use some type of water seal to inside of cabinet ( thompson est. )
We have not tested any other brand of sealer over the existing finish, and it is not part of our recommendations for care fo the stand. You would need to do a small test area first, and it might require sanding the fishing to get it to stick.
Date published: 2015-09-01
How much is item#67362
Thank you for your question. However, we do not sell directly to our consumers for this size of a product. You would need to visit a local family run pet store to get a pricing quote in your area.
Date published: 2015-08-19
Weight of canopy
I bought the marineland 55 gal. all glass quarium and majesty stand. I want to buy a canopy, my question is: will the aquarium be able to support the weight of the canopy plus the water and rock decorations plus HOB filters? Isn't it too much weight for the aquarium to bear? Thanks!
Yes, it will be able to bear the weight of the canopy as well; it is not too much for it.
Date published: 2015-08-13
I have the 72" majesty stand. Would it be safe to cut the center section out between the doors on the front?
No, not at all. That would affect the integrity of the stand, and cause major issues.
Date published: 2015-08-11
I just bought a marineland 10 gallon tank, which size stand is used with this tank?
The tank is the MARINELAND® 10 Gallon BioWheel LED Aquarium Kit.
Thanks for the help.
The black Majesty, item 67203, is the only one we make for 10 gallon tanks.
Date published: 2015-08-10
Majesty Dimentios ? help
Hello I'm in need of height dimentions for the majesty 36"x18" stand and canopy
1- height at wich the aquarium sits on stand ?
2- the inner clearance height of the canopy ( will this accommodate the Sophisticated 24 Hour Lighting System Product No. 32980) ?
3-the outer hight of the canopy #how high off the rim does this sit) ?
I have a shelf above my aquarium so my space is limited. any help is much appreciated thanks.
The stand is 28" for the stand. It has a tank cavity depth of .25".
Inner dimensions of the canopy are 36.675 x 18 3/4 x 7.875
Outer height is 8.5".
Date published: 2015-06-26
I'm looking to but the 60x18 black wood canopy to go with my aquarium but was wondering does the back have room for filter tubes, water heater, bubble tubes etc going to tank? Would I have to drill holes? Also does the canopy take away from the tank glass wise? Like when I put it on will it cover any glass cause my aquarium has a black lip. It's a majestic also. Thanks
The Majesty canopy is indeed open in the back for storage, passage of tubing, and electrical cords. Also the canopy does not take away from the glass as it does rest over the top framing only.
Date published: 2015-06-17
36x36 monterey cabinet.
I looked at the 36x36 Monterey cabinet at a local LFS. The side panel slides towards the back, is this correct(they got it to slide)? I would think that it lifts out, otherwise, it would not open due to the back of the stand being against the wall. They did not seem to know much about it. I am concerned because the front brace between the 2 doors would not allow for a sump to be placed into the cabinet.
The side panels are fully removable.
Date published: 2015-05-26
HI. My 75 gallon majesty stand isn't quite level front to back. It is slightly out of the bubble on level, with the back being lower. This is with the tank on stand, and gravel with about 8 gallons of water inside. Is this a problem, how to rectify? Thanks
This is not necessarily a question that can be answered in this forum. What type of flooring is the stand on? Is the floor level? Quite often, floors are not completely level and throwing the stand off. I've set tanks up in all sorts of similar situations without a problem. I doubt that your situation is an issue, but without seeing pics of what you are seeing and knowing more about the flooring, I cannot provide a definitive answer. If you can, email us pics directly and put FOR BREX in the subject line.
Date published: 2015-05-05
Majestic stand and 120G High Tank - With Corner Overflow
Hi I am working with my local fish store and I am trying to figure out the total height of this setup. I am looking at the 60" x 18" x 26" tank. How tall is the stand? Is the stand 28" high? does the tank sit on top of the stand or does the border of the stand cover the bottom? Hence how tall is the total setup? Is it 54" - more or less? I'm assuming there are no options for a slightly shorter stand?
Thanks for your time.
The stand is 34.5" tall. The tank will sit down in it at a depth of 2". We also have a Monterey in this size, but it is the same height. We have a 120g tank that is 48 x 24 x 25 if that helps.
Date published: 2015-04-21
I just purchased your Marineland 75 gallon tank and stand. I am having trouble trying to find the matching canopy. The one I need would be the 48x18in. I live in Manchester NH
If you go to the bottom of our homepage, click on Buying Options, then click on Dealer Locator and enter your zip code, you can find local stores. This is something that will need to be special ordered through a local fish store.
Online, try www.drsfostersmith.com, www.thatfishplace.com or www.petswarehouse.com.
Date published: 2015-04-15
Veneer plywood top on Marineland stand?
I bought a stand for a 75 gallon corner flow tank from Triad Reef Critters in Greensboro, NC. The tank has a thin piece of plywood/veneer across the top supports. Is this supposed to remain in place? If so, should I just cut out a section underneath the corner flow? Will this affect whether the tank sits level? Thanks.
If you have a Majesty stand, it is most likely upside down. There is no plywood across the top of the stand as it is open. You would need to flip it over. The only stand we make for a 75 gallon with a solid top is the Monterrey and cutouts for plumbing are already there.
Date published: 2015-03-11
What is the height for a 48x24 stand?
Date published: 2015-03-02
How tall is the 60x18 stand?
Your description only gives width and height. I am curious to know how high off the ground my aquariums would be? Hopefully around 36".
Date published: 2015-02-18
Looking for info about Majesty 36x13 Oak stand
I have not been able to find a picture online. Does stand have a polyurethane finish? Will I be able to stain the wood if I want to make it darker? Can I purchase a stand with no finish?
It does not have a polyurethane finish, so yes, you can stain it if you desire to do so. No, we do not sell stands without a finish or do a custom order.
Any alteration to it of course voids warranty.
Date published: 2015-02-12
Interior dimensions of stand
What are the interior dimension for the 48" x 18" stand and also the 72" x 18" stand? What dimensions sump tanks would fit in each one?
48x18 - 47.375 x 17 3/8 x 26.75 ( LxWxH)
72x18 - 71.5 x 17.5 x 26.75
Both have 2 doors in front. You will need to push the sump through one of these doors to make it fit. Both are 15.25" wide and 21" tall on both stands.
Date published: 2016-02-07
Is a majesty stand 48 x 18 compatible with an Aqueon 75 gallon?
According to the product manager, it should fit but may be a little tighter front to back, then ours.
Date published: 2015-01-14
I'm looking to order your 60x18x26 tank and stand but I'm having trouble finding the dimentions of the majesty stand and also how many front facing cabinet doors it has? Also dimentions to those door openings to be sure I could fit my fluval fx6 inside the cabinet thank you, mike
62.00 L x 20.25 W x 28 H external (There is a link to a spreadsheet with dimensions, directly on the website product page)
2 doors, (2) 15.25 width and 21" height
Date published: 2015-01-07
How tall is the Majestic Rectangle Stand (Product Item # 67603)? The spec sheet lists the length at 30" and the width at 12".
Date published: 2015-03-24