Advanced LED Strip Light

Advanced LED Strip Light
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
  • Image 14
Product No. ML90616-00
Find a Store In Stock

Marineland Advanced LED Strip Lights provide the ultimate opportunity to create a realistic underwater home-aquarium environment. This all-new line of LED lights is 20% brighter and is designed for reliable, long-term performance. Adjustable mounting legs allow for flexibility in fitting aquarium widths of 18-24 inches, 24-36 inches, 36-48 inches, and 48-60 inches, and an integrated timer provides maximum control. Daylight LED lamps provides brighter output than two typical fluorescent bulbs and lunar LED lamps replicate the moon-light cycle. Advanced LED Strip Lights are ideal for freshwater or saltwater aquariums and low intensity plants.

  • High-efficiency white and blue LEDs with timer
  • For freshwater, saltwater, and low-intensity plants
  • Brighter than two fluorescent tube fixtures
  • Lunar LED lamps replicate the moonlight cycle
  • Integrated timer controls day and night settings
  • Adjustable mounting legs for customized fit

What is the difference between a advanced LED and the other LED that is sold by main island?

Asked by: Deb66
As I do not know what the model name or number is for the other LED that you refer to, I cannot answer this question. BREX
Answered by: BREX
Date published: 2016-06-15

I was wondering if the blue and white LEDS should be on at the same time for plants. Or do the plants only need the white lights

Asked by: Rich1219
Blue and white should both be used. The blue come on with the white anyway, and plants utilize blue, green and red spectrums. BREX
Answered by: BREX
Date published: 2017-01-27

I have the 36" advanced led strip light and it started to flicker. What can i do about this?

Asked by: Elan
If it is not over a glass canopy, this can be due to moisture, and you can try to remove it, wipe it down, and see if it will "dry out" and correct itself, but in most cases, it will need replacing. If you are using a canopy, make sure it is plugged into a power strip with surge protection as you could be having a voltage issue. If it is neither of these circumstances, then it may be a wiring issue and the light has a one-year warranty. In this case, you would need to contact us directly with your purchase information. 1-800-322-1266. BREX
Answered by: BREX
Date published: 2016-05-16

What is the PAR vaules on your 48" advanced led strip?

Asked by: Ethan161
102 for 12" depth and 61 at 24". BREX
Answered by: BREX
Date published: 2016-05-11

My blue led's stopped working, but the white led'so are ok

Asked by: Chuck3
Please contact us via email or telephone so that we may assist you under warranty. 1-800-322-1266. BREX
Answered by: BREX
Date published: 2016-05-03

Would this light work well in a reef tank with corals? What is the price difference between this light and the Marineland Reef LED light strip?

Asked by: Derek1988
No, it would not. This is a standard daylight for fresh water tanks, basically. It will grow some low to moderate live plants in a fresh water tank, but will not provide corals with near enough light. The price difference could be substantial, depending on the size of the light that your tank requires. BREX
Answered by: BREX
Date published: 2016-04-25

I just got the 18 to 24 inch light for my trigger systems ruby 36 refugium do you think this light is powerful enough for cheato thanks

Asked by: Phand
We have not tested it specifically on chaeto, as it is not designed for marine tanks, however, the kelvin is around 5900 so it should be, yes. BREX
Answered by: BREX
Date published: 2016-04-19

Hello! First of all, great product; however, I'm devastated that the blue LED will not stay on. It will sometimes flicker on, stay on for a couple seconds, then blink off. Is there a 1-year warranty on this product? Thoughts? I'd LOVE to have it working!!

Asked by: rasbora
I am sorry to hear this has happened. Yes, there is indeed a one year warranty on the product. I will email you directly in order to assist you. BREX
Answered by: BREX
Date published: 2016-04-04

I need a manual for mine.

Asked by: sapperwes
Good morning, Thank you for your inquiry. The manual is listed on the website under the product details. However, we will also email this directly to you as well! Thank you again, MINI
Answered by: MINI
Date published: 2016-03-28

How do I change preprogrammed lights on led strip?

Asked by: Dj schwab
Good morning, Thank you for your inquiry. Please find the instructions listed bleow: Blue LEDs: 1. Press and hold the blue button for 3 seconds. 2. The timer will read "ON". You are now setting the time that the blue LEDs will turn ON. 3. Press the white button to set the hour and the blue button to set the minute. 4. After 5 seconds of inactivity, the timer will display "OFF". You are now setting the time that the blue LEDs will turn OFF. 5. Press the white button to set the hour and the blue button to set the minute. 6. After 5 seconds of inactivity the system will exit set up and return to the clock. White LEDs: 1. Press and hold the white button for 3 seconds. 2. The timer will read "ON". You are now setting the time that the white LEDs will turn ON. 3. Press the white button to set the hour and the blue button to set the minute. 4. After 5 seconds of inactivity, the timer will display "OFF". You are now setting the time that the white LEDs will turn OFF. 5. Press the white button to set the hour and the blue button to set the minute. 6. After 5 seconds of inactivity the system will exit set up and return to the clock. Thank you MINI
Answered by: MINI
Date published: 2016-03-28

Just bought the light about a month ago and the timer that I set this too has come undone. I misplaced the manual. Can you help me reset this?

Asked by: Eddie D
I can do better than that! I will email you the manual directly. BREX
Answered by: BREX
Date published: 2016-03-24

What are the technical specs on this light?  Such as, featured bandwidths, degrees Kelvin, lumens, etc...

Asked by: Kaige
That depends on which size you are interested in, but it ranges from 45-102 for PAR, 2580-5739 for Lux, and 5344-6036 for Kelvin. It works really well for low to moderate light freshwater plants, and is not recommended for corals. BREX
Answered by: BREX
Date published: 2016-04-27

A day later, cycle has completed - time is 8:17 and the blue lights are not on. I know the blue lights are on because I quick pressed them. Has the preset programming overridden? Ideally - I like the way the preset is done ... on am and on pm ...

Asked by: Shamrockoz
The preset is for all lights to come on at 3 pm and go off at 10 pm. You have to override this by setting the clock to your current time BEFORE setting the on/off times that you want for the lights. BREX
Answered by: BREX
Date published: 2016-03-18

How do you set the timer 

Asked by: 1966
I am sending you the instruction manual. BREX
Answered by: BREX
Date published: 2016-03-17

Just bought a 24" model - No manual in box - trying to set the clock. Please email me a manual.  Appreciated.

Asked by: Shamrockoz
Sure, will do! BREX
Answered by: BREX
Date published: 2016-03-17

Hi, I need a replacement plug in cord for this exact light. It is the 24-36" planted led lamp. Do you sell these, if not where could I get one. Thanks, Donna

Asked by: Donna42
Hi Donna, yes, we sure do! Here is a link to it: http://www.marineland.com/Products/aquarium-parts/Lighting-Systems/LED-Lights/Transformer-RC-and-AP-24-to-36.aspx If your unit is less than a year old, however, just give us a call and we will send one to you, free of charge. BREX
Answered by: BREX
Date published: 2016-03-16

Can the blue and white lights be on at the same time? Is there a more detailed manual? What came with the lamp is only a 3 page quick start.

Asked by: BlondiePrice
Yes, they can be on at the same time or you can have blues only. I will email the manual to you. BREX
Answered by: BREX
Date published: 2016-03-11

Is it recommended to have the blue light on all night, as opposed to off? Is it too much light for the fish?

Asked by: BlondiePrice
No. The fish need a day/night cycle, and leaving any light on all the time will cause a good bit of algae. Some of our small kits that are 1-3 gallons are okay to use as a "night light" for children's rooms, but in general we don't recommend it. Those kits are so small, and the light is not really bright so it generally is not an issue. BREX
Answered by: BREX
Date published: 2016-03-11

how many watts?

Asked by: Jack1234
Depends on the size unit. Here is a list from the 18" to the 48". 12VDC 1000mA 15VDC 1000mA 15VDC 1600mA 12VDC 3000mA 36W BREX
Answered by: BREX
Date published: 2017-09-21

Please email me a manual for led light bar.  Thank

Asked by: Pete9999
Done! BREX
Answered by: BREX
Date published: 2016-02-29

I would like the product manual for this light. Lost mine and I'd like to read about and adjust the timer. Thanks.

Asked by: Dagandog
Thank you for your inquiry and we will email the instructions to you directly. MINI
Answered by: MINI
Date published: 2016-02-24

need owners manual forml90619-900. was not in the box when I opened it. need directions on lighting?

Asked by: ttocs
Thank you for your inquiry and we will be emailing these to you directly. MINI
Answered by: MINI
Date published: 2016-02-24

Would you please email me the manual. Thank you.

Asked by: ShawnD
Absolutely! You should receive it to the email you have listed. Thank you, MINI
Answered by: MINI
Date published: 2016-02-24

How can you use this LED lighting system on an acrylic tank without the heat from the lighting system warping the top of the acrylic tank? This has occurred to my new 55 gallon tank.

Asked by: Eddie Longoria
Good morning! This light fixture should be just fine in regards to being used with an acrylic tank as the heat from the lights does not go toward the tank, but is emitted from the top of the light fixture to prevent any heat dispersal. Thank you, MINI
Answered by: MINI
Date published: 2017-09-21

What lighting configurations do you recommend for a 125g Marineland tank?

I was not planning to put glass lids on this tank or a canopy. I do not see a 72" LED model. Is there a way to put 2 - 36" on the tank sitting next to each other without sliding off and in the water? Or am I forced to used glass lids?
Asked by: Mark005
This is not an official Marineland answer, just an idea I had. You could cut the bent "foot" off of one of the supplied legs, which would give you two straight pieces left over. Use these two pieces to 'connect' two fixtures together at the corded end. Put full legs on the control end of each fixture and mount to the tank edges. This will put the power cords of each light in the center of the tank with about two inches of gap between the light fixtures. The straight pieces might be long and strong enough to support the light fixtures in the middle of the tank. If not, you could support the middle by tying a piece of fishing monofilament to the cords and suspending from the ceiling. You can adjust the gap between the lights by extending the outer legs slightly, but it will probably be a minimum of 1-inch gap to account for the strain relief of the cords. The drawback to this project is you have destroyed one of the legs permanently. You might be able to find a substitute piece of rod for the connection in the middle.
Answered by: DaddyFlip
Date published: 2016-02-23

what the gallon rating?

I recently had a friend buy your 36" high intensity strip lights for his 90 gallon fresh water tank, and he had to supplement the tank with more lighting ? How many gallons is the light rated for ? I haven't found anything about that online or in your questions. Nor do you have the gallon rating in the information on the lights. Would really appreciate an answear as I'm interested In buying myself one of your high intensity strip lights but I don't wanna have to put supplement lighting on my aquarium.
Asked by: Bennie
We do not make a "gallon rating" because they are intended for tanks of the length of the light. For example, a 48" - 60" long light will fit tanks from 55 gallons to 250 gallons. All of these tanks are 48" -60" long. However, when selecting a light, you need to know what the light is intended for and then what type of Kelvin rating, etc, is needed to accomplish that goal. The Advanced LED is an extremely bright light at 6000 Kelvin. It is intended for tanks with freshwater fish only, but it will even support low light plants in most tanks. Tanks that are particularly deep, like a 150 gallon for example, would require two of these strip lights, one in front, one in back. These are not "high intensity" lights. High intensity lights are typically ones with power compact or metal halide bulbs. BREX
Answered by: BREX
Date published: 2016-02-01

Can I connect rf remote control to your led light

I have model 90619-900 I want to add a remote rf filter so I cam have it dim low to high automatically I treys to plug it in but no power,it was after market type. Do u sell one or know one that will work
Asked by: keoni
No, these lights do not have the capablility to be connected to a dimmer. BREX
Answered by: BREX
Date published: 2016-02-01

I misplaced instructions for my Advanced Light Strip and need to reprogram on/off times.Would you please send me instructions. Thank you!

Recently I have noticed the aquarium floor substrate developing green patches in some areas. I noticed my water temperature was a bit cooler than normal, although within safe range of thermometer (72-74). Also, over the last few months I have been adding sand to replace what has been gradually removed from siphoning during cleaning. Any ideas of what may be causing this? Just did a small RO water change (10 gallons) in my 77 gallon tank and had green spots reappearing after just 1 day. My tank is corner unit bow front Venenzia 350 model. Any suggestions and/or recommendations appreciated. Thank you.
Asked by: JonnyRay
Yes, we will email the instructions to you directly. Green spots just indicate algal growth. Nutrients cause algae as does excess lighting or the wrong lighting. The cool water would not cause algal growth, quite the opposite. Algae thrives in warm waters. In order to help pinpoint the cause, we would need to know more about your maintenance routine and stocking levels. However, we would recommend cleaning the RO unit, doing water changes more often, and cutting back on food as first steps to solving the issue. BREX
Answered by: BREX
Date published: 2016-01-25

Blue LEDs Not Turning Off

The blue LEDs on my Advanced LED Strip Light will not go off. They stay on regardless to what the timer function has programmed or me physically pushing the blue button. I tried cycling power (unplugged and then plugged back in) but it still has the same issue. Any suggestions? Thanks.
Asked by: MichaelB
Try leaving it off for a couple of hours (it sounded like you just turned it off briefly and then back on). If this does not work, it has a one year warranty so give us a call or email directly for assistance. BREX
Answered by: BREX
Date published: 2016-01-27

Manual book

Directions how to do timer on it on and off. Both day and nights time??
Asked by: Trotter
Emailing manual to you directly. BREX
Answered by: BREX
Date published: 2016-01-14
  • y_2018, m_1, d_22, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_3, bvpage2n
  • co_hasquestionsanswers, tq_127
  • loc_en_US, sid_ML90616, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland
   PAR AT 12"
PAR AT 24"
 LUX AT 12"
LUX AT 24"
COLOR TEMP
WATTS
18-24” ML90616
216
134
12526
8492
8637
28
24-36” ML90617
207 142 11718 7882 8755 38
36-48” ML90618
199 118 12089 7569 8816 59
48-60” ML90619
240 151 12917 9195 8276 74

Replacement Parts