LED Strip Light

LED Strip Light
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
  • Image 14
Product No. ML90612-00
Find a Store In Stock

Marineland LED Strip Lights provide the ultimate opportunity to create a realistic underwater home-aquarium environment. This all-new line of LED lights is 20% brighter and is designed for reliable, long-term performance. Adjustable mounting legs allow for flexibility in fitting aquariums widths of 18-24 inches, 24-36 inches, 36-48 inches, and 48-60 inches. A daylight setting is brighter than a single tube fluorescent fixture, and a lunar setting provides a realistic moonlight shimmer.

  • High-efficiency white and blue LEDs
  • Creates a realistic underwater environment
  • Brighter than one fluorescent tube fixture
  • Lunar LED lamps replicate the moonlight cycle
  • Adjustable mounting legs for customized fit

led day & night

where can I get a strip light for a 15 gal column tank with a opening from 13 to 14 inches. I would like a day and night
Asked by: Puff
We do not make one of that length with both blue and white. We have one under the Tetra name that is white only or blue only. Universal LED Light. BREX
Answered by: BREX
Date published: 2015-05-26

What's the PAR rating for this light?

Hello, I am using (item #32997) LED light strip on a small 10 gallon freshwater aquarium that has live plants. Under this light some of my plants grow great and some don't grow at all. What is the PAR rating for the 18-24 inch single bright LED lighting system, item #32997? Thank you for your assistance Andrew M.
Asked by: AndrewNC
We do not have PAR ratings on the Single Bright leds as it is only 5000 Kelvin, and not intended for plants or corals. Low light plants such as anubias or java fern may do okay under it, but anything else would not. BREX
Answered by: BREX
Date published: 2015-05-26

How do I order a replacement power socket (female)?

I have a Product No. ML90614-00 36" led light which needs a new power socket on the unit. The male socket (on the cord) is fine, the (female) socket makes noise when the cord is rotated and the lights dim, flicker and go out.
Asked by: ShawnOL
I cleaned the outside of the male end with wet/dry sandpaper and cleaned out the female socket with rubbing alcohol. Works at full brightness again, just flickers a bit if the cord it bumped/moved. The blues on the 2nd panel (far end) are still out, but that's a different issue. Most likely will need re-soldering between the two boards.
Answered by: ShawnOL
Date published: 2015-09-26

does it come with a build in dimmer or would i need to buy on?

Just wondering in case I ever needed to dim the lights.
Asked by: AquaPlayz
Neither; this light is not designed to be put on a dimmer. BREX
Answered by: BREX
Date published: 2015-05-14

droppped light into aquarium and now does not work -- can a switch and power plug and new light board be ordered?

model # 01L32 i8 " board # 1028
Asked by: BDKdad
No, you would need to just buy a new light. BREX
Answered by: BREX
Date published: 2015-05-11

Can I disable or remove about half the LEDS and reinstall them in a year or so?

I have the eighteen niche one and need less intense lighting to reduce algae. I got rid of my CO2 tank and I'm trying to make things simpler. If I can remove or disable LEDS then can I put them back at a much later date?
Asked by: Botanical
No. They are installed in a very specific way. To reduce algae, you need to reduce nutrients so feed less, and vacuum/perform small water changes, more frequently. BREX
Answered by: BREX
Date published: 2015-05-02

How many lumens and watts are these?

I have it on my nano cube but I want to know what I need to grow low light corals. Currently have 2 Kenya trees, 3 head pulsing Xenia frag, button polyps, and 2 1"X1" green star polyp frags.
Asked by: Rob909
It's not bright enough for corals at all. The 18-24 is 300 Lumens, the 24-36 is 400 Lumens and the 36-48 is 600 Lumens. They all have .06 watt led bulbs. BREX
Answered by: BREX
Date published: 2016-03-14

What's the the light spectrum is it 6500k

Asked by: rtakala1
No, it is 6000 K. BREX
Answered by: BREX
Date published: 2015-05-02

Is the light programmable?

Can the light be programmed for day/night settings?
Asked by: Sjsjjsjs
No, it does not have a timer. The Advanced, Reef, and Plant lights do. BREX
Answered by: BREX
Date published: 2015-03-30

marineland led 24-36inch (non reef one)

Hey I have freshwater but switching over to salt and was seeing if this light would be good to have in the sump area to grow Chaetomorpha Algae.
Asked by: madmanmadrid
Nope, sorry to say it will not. It does not have the spectrums you would require for the algae. It is only 6000 Kelvin, and PAR and Lux would be very low. BREX
Answered by: BREX
Date published: 2015-03-14

48 inch strip light model ML90612-00

Asked by: milto
All of our led lights come with a one year warranty on manufacturer's defects. BREX
Answered by: BREX
Date published: 2015-03-14

Rating for the LED Strip Lights

I have 2 fish tanks; one has a 20" opening from left to right and the other has a 30" opening. At the store I saw that you have two models that will work for these, but I was looking for the data on these models and could not find them. At the website the data is somewhat there, but in particular, what is the kelvin rating for these? Please email me the answer so I can decide if I should buy these for my tanks. Thank you
Asked by: Steve5284
The Kelvin rating for both is 6000. BREX
Answered by: BREX
Date published: 2015-02-26

do the light themselves have a cover

i have 30 gallon tank with a filter that splashes up water would the light be protected by plastic or would there have to be a glass canopy cover?
Asked by: Minisasha18
You would need a glass canopy. BREX
Answered by: BREX
Date published: 2015-02-18

Do you sell a replacement power coard for this item

I missplaced my power cord and I am looking to replace it.
Asked by: superluigi
Yes, we do, right on our website. If you have either the 18-24 inch or 24 - 36 inch light, the 500 mA adaptor is the correct one. If you have the 36-48 or the 48-60 inch light, the 1000 mA adaptor would be the one to buy. BREX
Answered by: BREX
Date published: 2015-02-18

How long will the bulbs in your LED strip light shine at full intensity, before they begin to fade?

I've seen that your LED strip light is rated for 17,000 hours. But won't the LEDs begin to fade before that? About how long can I expect the LEDS to shine at full brightness? Thank you.
Asked by: CharlesNelsonReilly
The 17,000 hours is when they should begin to fade, somewhere close to that time frame. They do not burn out, ever. BREX
Answered by: BREX
Date published: 2015-02-09

salt water

do you think this light will be good enough for a salt water fish only tank...no coral
Asked by: jjordan
Yes, it should suffice for only fish, no live rock, no corals. If you decide later to add live rock, which I highly, highly recommend, then you could add the Accent LED in blue to the tank. BREX
Answered by: BREX
Date published: 2015-04-15

Is this strip light suitable for aquatic plant growth

Wanted to see if I could keep this light or if I would need a stronger output
Asked by: AnthonysAquariums
Most likely java moss, java fern, and anubias, etc, would do okay, but it is not a plant light. It would only have 6000 Kelvin and they actually require 6500 Kelvin. BREX
Answered by: BREX
Date published: 2015-02-04

Will this product work with 220-240V

Wanting to purchase through Amazon...
Asked by: Clinton
Only if you use an adaptor. BREX
Answered by: BREX
Date published: 2015-01-27

How wide is the 18" version?

Asked by: guppy2
All of the strip lights are 6" wide. BREX
Answered by: BREX
Date published: 2015-01-26


Asked by: LARRYE
We do not make a 72" light. I would recommend two of the 36" Advanced LED lights unless you have a marine tank. BREX
Answered by: BREX
Date published: 2015-01-06

In order to avoid damages due to the condensation, may I introduce the lamp into a plastic bag?

My aquarium has a cover, then I have to install insaid it, I did read the instruction manual and it says You need a barrier between the water and the lamp also in an open aquarium. My aquarium has a cover in all the area, it means you can not see the water from the top then the the lamp would be install between the water and the cover where the condensation is to high, the my question is if I can instal the lamp inside a plastic bag to avoid it will be damaged by the condensation. But I don't know if the heat of the lamp itself could damage it.
Asked by: Ivan39
I assume you mean your tank has a wooden canopy. The light must be over a glass canopy which lies flat over top of the tank. No, you cannot place it in plastic. BREX
Answered by: BREX
Date published: 2014-12-29

How can I get a new power cord for this light?

Model # ML90613-900 Marineland LED Strip Light
Asked by: Kazelfraizel
As this is a fairly new item, you would need to call us or email us directly with your information to get one. We do not sell them directly. BREX
Answered by: BREX
Date published: 2014-12-29

Will the ml90615-00 48-60 " light fit a 90 gallon 48" long tank?

Asked by: Franka
Yes, it sure will. BREX
Answered by: BREX
Date published: 2014-12-22

What is the difference between ML90615-00 led light and 33004 led light?

I have seen both on line on different web sights for sale.
Asked by: Franka
The light itself is the same. They are both Single Bright lights. We did not make any change to it, but the ML90615 has a new package so that it looks the same as our updated Reef LED and Advanced LED lights. BREX
Answered by: BREX
Date published: 2014-12-22

low lite plants only?

i just bought the 75 gallon ensemble from petsmart and it comes with the led lighting strip. do you have specifics for output and color range? is it bright enuf for anything other than low lite plants?
Asked by: bogiebj
The 48 inch LED Light Strip is 6326 Kelvin so it is borderline. It would do low light and quite possibly moderate light plants. Especially since this is not a deep tank. However, you would want two on this tank because of the width. BREX
Answered by: BREX
Date published: 2014-12-05

Led light length

Which led light length would fit the best on a 55 gallon aquarium (48x12)
Asked by: George99
The 48" version. If you are looking at older packaging, the 48-60 inch version. BREX
Answered by: BREX
Date published: 2014-12-05

48" LED hood won't turn on - just "blinks" on/off once per second.

I've had a 48" Marineland strip LED light on my 70 gal tank for only a couple years and it has been great but this week it started acting up for no reason. When the timer comes on, the white and Blue LEDs all just blink on and off about once/second and don't stay on. I unplugged it from the timer and plugged directly into wall. Same symptom. I then turned the switch on and off a few times. Same thing. I suspect the transformer is faulty. Please advise.
Asked by: ChipA
This is caused by exposure to water in most cases. Typically, if the transformer is at fault, the unit won't light at all. It can also be due to a voltage issue with your home. For example, at this time of year, more electricity is being used because of heating homes and/or Christmas lighting. You might try a power strip with surge protection, as that protects against voltage issues. However, the unit could be damaged now, and the power strip may not help. BREX
Answered by: BREX
Date published: 2014-12-01

Need LED Light to replace Fluorescent on your recessed hoods

I have 4 of your recessed hoods, a little over two years ago I replaced all of them with your LED Hood, all of the lights on this have gone out twice in 2 years...What I want is an LED that will fit over the recessed fluorescent hoods, since these are sealed and water tight and the LED hoods are not, which causes the lights to corrode and go out in about a year...
Asked by: LogiBeart
Depending on the length of the hoods, we should have a LED Strip Light that fits. Just pull the legs out and lay it flat on the glass partition. BREX
Answered by: BREX
Date published: 2014-12-01

Stopped working

I have always used this light on a timer during the day. Today my mother shut off the light using the switch, and now it will not turn back on. I purchased this about a year ago, but don't think I have the receipt. Do you have problems with the switches, or any other ideas on what could have happened?
Asked by: Tman
No, we have not had any problems with this light, actually. It is most unusual for it to not turn back on at all, just because she turned the switch to off. So if you remove the timer, and plug it into the power strip directly, nothing turns on when you turn on the switch? Do you see a little green light on the transformer box? If not, you have an issue with the transformer. If you do see the little green light, then the issue has to do with the light somehow. Just email or call us directly with the lot code and we will see what we can do. BREX
Answered by: BREX
Date published: 2014-11-18

How do I mount this on aquariums over 60 inches?

On a 65 inch aquarium, would I just place the light on top of the glass cover? If so, wouldn't light leak form the sides from standing higher? I don't want the light in my eye.
Asked by: computerguru
Yes, you can lay the light on the glass canopy. I have never experienced an issue with light leaking from the sides when the light stands on its legs. The light is directed downward with a special lens. BREX
Answered by: BREX
Date published: 2014-11-10
  • y_2018, m_4, d_18, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_5, bvpage2n
  • co_hasquestionsanswers, tq_143
  • loc_en_US, sid_ML90612, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland
ML90612 - 18" (Fits tanks 18"-24")
ML90613 - 24" (Fits tanks 24"-36")
ML90614 - 36" (Fits tanks 36"-48")
ML90615 - 48" (Fits tanks 48"-40")