Impeller Housing for Eclipse® Systems

  • PR3341
  • PR3341
Product No. PR3341


Buy Now Find a Store In Stock
Impeller Housing for Eclipse® System 2, 3, Hex 5, and Corner 5.
Impeller Housing for Eclipse® Systems is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from Fit like a charm When I got this wasn't sure it would fit but it did. I'm glad that this company can sell parts at the price they do so we can keep our little fish friends happy and healthy.
Date published: 2014-06-12
Rated 5 out of 5 by from exactly what i needed although they had slightly revamped the design on this from my older model (I was hesitant to buy it at first even though the product #'s matched), but I called an associate, they were very helpful, fulfilled my order, and it was exactly what I was needing and looking for.Works like a charm and my fish are happy again! :)
Date published: 2014-06-10
Rated 5 out of 5 by from Great product and it was delivered very fast. The service I received was excellent and the representative went far and beyond to help me.
Date published: 2013-07-10
  • y_2018, m_10, d_13, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_PR3341, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland

I want to buy a whole set with the pump

Asked by: Winter seven
The eclipse series has been discontinued, Winter seven. We're happy to help you find whatever parts you need, if they are still made. Please call Marineland at (800) 322-1266 for help.
Answered by: Customer Service
Date published: 2018-04-20

Do you carry this product for the 12 gallon system?

Asked by: Slammer1005
No, it is no longer available. BREX
Answered by: BREX
Date published: 2018-04-09

Hexagon 5 replacement pump

Where can I find written directions on how to clean the impeller for this pump and motor system?
Asked by: Terig
We do not have such instructions on the site, although I have answered this question many, many times, so it would be in the Ask A Question area for sure, and you could search those questions. Remove the intake tube. Pull down hard on the short tube at the base of the pump until the cover pops off. Pull out the impeller, use a q tip and vinegar to clean inside the pump while the impeller soaks in vinegar for 15 minutes. Make sure to remove hair, and large amounts of sludge or debris prior to soaking. Rinse well in warm water, rinse out the pump with some warm water; do not submerge the motor. BREX
Answered by: BREX
Date published: 2015-05-28

Does this go into the motor for Eclipse 3 to house where the tube goes?

Asked by: Pwise
No, this fits the 3 gallon system. I suspect you have the Eclipse 3 Filtration and Lighting System for 29 and 37 gallon aquariums. That would take the PR3084. BREX
Answered by: BREX
Date published: 2015-01-12

Marineland magnetic impeller for 5 gallon Hex Eclipse system

What causes the magnetic impeller to lodge into the impeller housing unit? Soaking in white vinegar did not enable impeller removal for replacement. It appears that the rubber surrounding the impeller is "glued" to the housing unit. How to prevent this issue? How to remove the impeller that is stuck and not turning properly? Is this a problem with the main filter system or the impeller housing unit? Recommendations welcome with thanks.
Asked by: cgkuhn
This is typically caused by allowing the water level to drop too low in the tank, thereby not having the pump in enough water to keep it cool. It then overheats. Once the impeller is welded in, the only recourse is distilled white vinegar. Soak for at least an hour. If this doesn't work, the impeller and pump will no longer be usable. BREX
Answered by: BREX
Date published: 2015-10-22
  • y_2018, m_10, d_13, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_PR3341, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland