Pump Motor Assembly

PR10279
Product No. PR10279

$27.23

Buy Now Find a Store In Stock
Pump Motor Assembly for the BIO-Wheel® Canopy.

What propeller I need for Pump PR10279 ?

I bought Pump PR10279 from Marineland. What propeller I need for this pump , because old one doesn't work. Do you have it, can I buy from you ?
Asked by: Irina
Yes, we do have this pump. Here is a link: http://www.marineland.com/Products/aquarium-parts/Filtration-Products-and-Skimmers/BIO-Wheel-Canopy-Parts/Canopy-Impeller-Assembly.aspx BREX
Answered by: BREX
Date published: 2016-01-05

What propeller I need for this pump PR10279 ?

I bought pump PR10279 form you, what propeller I need for this pump ? Can I Buy it from you ?
Asked by: Irina
PR09395; here is a link: http://www.marineland.com/Products/aquarium-parts/Filtration-Products-and-Skimmers/BIO-Wheel-Canopy-Parts/Canopy-Impeller-Assembly.aspx BREX
Answered by: BREX
Date published: 2016-01-05

What pump motor I need for eclipse 37 gallons aquavarium? Do you have it ?

I have 37 gallons Eclipse system aquarium from 1999. Pump motor doesn't work, do you have replacement part for this ? If yes what part # I have to look?
Asked by: Irina
Yes, we do have a replacement part for this. It can be found here: http://www.marineland.com/Products/aquarium-parts/Filtration-Products-and-Skimmers/Eclipse-Filtration-Parts/Pump-Motor-Assembly-for-Eclipse-PFE3.aspx BREX
Answered by: BREX
Date published: 2015-12-28

Impeller

It appears that PR10279 is the right pump for my aquarium. Does it come with an impeller? And does it come with the part that holds the intake tube? I was told that I would need impeller PR09395. I can't find that on this site. Do you carry it? If not, what do I use to replace it? What is the link so I can find it? The plate on the bottom of my pump is broken in the area of holding the intake tube, so that I have to duct tape the intake tube so that it doesn't slip out of the holder ring. Also Looking for intake tubes for 55 gal tank. Can you show me the link that I can find those? Thanks.
Asked by: tokkan
If you have this on a 55 gallon tank, you must have the Eclipse 2 or the Biowheel Canopy 600. I suspect the latter. Here is a link to all the parts that are still available for it; the impeller is not one of them: http://www.marineland.com/Products/aquarium-parts/Filtration-Products-and-Skimmers/BIO-Wheel-Canopy-Parts.aspx And no, the impeller does not come with the pump/motor. BREX
Answered by: BREX
Date published: 2015-05-02

Size of pump

Is this pump for use - does it fit - in a 24 / 2 bio wheel canopy.
Asked by: tokkan
Thank you for posting your question, but I am uncertain as to which product you are referring. This pump fits the Biowheel Canopy which came in sizes for the 55 gallon, 75 gallon, 46 Euro and 80 Euro. They were the Bio-Wheel Canopy 600, 600-W and Bio-Wheel Canopy 600-E. BREX
Answered by: BREX
Date published: 2015-04-30

I have 85 eclipse hood filter. Both filters broke. What do I need to replace them?

A tree hit my house and I had no power for a month. I lost everything in the tank. I am looking to start my tank over as soon as possible. The one one the left won't power on and the one on the right come on but hesitates a lot. Each side has 1 bio wheel and one place for a filter. Please help.
Asked by: Myonne
As this is a discontinued item, you might want to try using distilled white vinegar and soaking the impellers for about half an hour before buying something new. You would need to buy a whole new glass canopy and led strip light plus a filter system to replace this one. BREX
Answered by: BREX
Date published: 2014-12-29

What else do I need to go with this?

I currently have a 75 gal tank with 2 bio canopys. Each one has room for 2 bio wheels and 2 pumps. I currently only have 1 pump in each and was looking to add. What other parts do I need to make this work? Thank you
Asked by: Domini
You would need the impeller, impeller cover, intake tube, and strainer, along with the pump. BREX
Answered by: BREX
Date published: 2014-07-18

How do I take this apart to clean or replace the impeller?

My motor/impeller has been making quite a bit of noise lately and I am wondering if it has some debris stuck up in it. I didn't see an easy way to open it up to check the impeller and didn't want to break anything. Is there a tech sheet on how to replace or clean the motor or impeller?
Asked by: Becky76
If you have the biowheel canopy, you would remove the intake tube, then pull the bottom cover off of the pump. This has a short tube extending down from it, and it looks like it is a solid part of the pump, but it is not. Pull down hard, remove the impeller and clean both the impeller, and inside the pump. BREX
Answered by: BREX
Date published: 2013-10-22
  • y_2018, m_7, d_19, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_PR10279, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland