Gasket Kit for C-160 and C-220

Product No. PR11988-01


Buy Now Find a Store In Stock
Gasket Kit for C-160 and C-220 (both models.)
Gasket Kit for C-160 and C-220 is rated 4.1 out of 5 by 19.
Rated 4 out of 5 by from Perfect fit Perhaps a little pricey, but when your filter is leaking you need the gaskets to fit.
Date published: 2017-12-06
Rated 5 out of 5 by from Perfect fit I bought the Gasket Kit and it stopped my canister filter from leaking.
Date published: 2017-09-18
Rated 5 out of 5 by from Great Service as always One reason I continue to buy Marineland products is that they are dependable, get the job done and the service I receive as hobbyist it prompt and effective. In the case it was a simple gasket swap but when a gasket is leaking it's got to be fixed!Thanks Marineland ...
Date published: 2017-09-10
Rated 5 out of 5 by from Just what I needed My marineland c220 started leaking after being cleaned and would not seal I looked on line and marineland had the best price for a new gasket kit the flat rate shipping seems a little high but I needed the part and it solved my problem
Date published: 2017-08-21
Rated 3 out of 5 by from As expected Nothing much to new gaskets and o-rings. Quality was less than the original but works. We will see how long this lasts. Seems there were MORE gaskets and o-rings on my pump than what comes in this kit. I wasn't happy to discover this. Cheap skates at the company I guess.
Date published: 2017-08-05
Rated 5 out of 5 by from Totally saved me!!! I needed an o'ring at s decent price and shipping time, and both of my needs were fulfilled!!
Date published: 2017-07-26
Rated 5 out of 5 by from gasket kit makes it very handy to be able to get the exact parts for what you need
Date published: 2017-07-20
Rated 5 out of 5 by from Solved the problem. Replaced gaskets and is functioning as good as new.
Date published: 2017-03-26
  • y_2018, m_1, d_17, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_en_US, sid_PR11988, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland

Hi I have a c220 and once it start getting water going or starts leaking on the sides. Can you help please

Asked by: Kevy
You need new gaskets, probably. We have not manufactured this filter in about 2.5 years, so any o rings for the motorhead, or in the valve block would need replacing by now for sure. We recommend purchasing a gasket kit to resolve this issue. BREX
Answered by: BREX
Date published: 2017-10-30

Can you please tell me, the exact sizes for each of the gaskets for the Marine c-220 because I can not find the kits any where locally even the pet stores you state on website, my husband can get them at another place he if has the exact sizes. Thank you

They are available here: We do not have the specs for the sizes available. BREX
Answered by: BREX
Date published: 2017-10-04

Where can I buy the silicone lubricant? All I see on here is sealant.

Asked by: Paul blart
We do not make silicone lubricant. Most fish and pet stores keep aquarium safe silicone lubricant in stock. Online, we would recommend BREX
Answered by: BREX
Date published: 2017-08-01

Where can I get the gasket for the primer. Mine became stuck. When I took it apart the button moves freely without the gasket. But once I put the gasket back on it stuck again

Asked by: Crmadding
Thanks for asking, Crmadding. The care team is happy to help. Please give them a call at 1-800-526-0650.
Answered by: Customer Service
Date published: 2017-07-13

In a new canister are the two little rubber stoppers already installed (so these two are extras?) or am I supposed to put them somewhere?

Asked by: Sassonic
Thanks for asking, Sassonic! Those are extra's for the back of the valve block. Be sure to install the include o-ring before using your canister filter.
Answered by: Customer Service
Date published: 2017-07-13

Just bought a used canister c220, and it just leaks and leaks. I noticed it didn't have a gasket around the motor head (the big gasket) Does it take 2 Big gaskets?

Asked by: Little Joe
No, it only takes one gasket. The gasket kit comes with one large one, the tray gaskets, and two small o rings for the valve block. BREX
Answered by: BREX
Date published: 2017-04-24

where does the gasket go

Asked by: bew69
Which gasket are you referring to - this filter has several. BREX
Answered by: BREX
Date published: 2017-04-24

I bought a C 160 and only came with the motor head gasket. I'm finding now the needs 2 small gasket and 4 more gaskets. I think that's why is not cleaning at a 100%. How you guys can help me.

Asked by: jmorales
The two small o rings are already installed on the underside of the valve block. Two spares are included with the filter, in a clear baggie inside the white parts box. The four gaskets are tray gaskets. They can be found on the top of each tray in the filter, except for the very top tray. That one does not have a gasket, since there is an o ring on the tube extending down from the motorhead. If you find these are missing, simply call us at 1-800-322-1266 or email you receipt and information to us at BREX
Answered by: BREX
Date published: 2017-12-24
  • y_2018, m_1, d_17, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_PR11988, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland