Gasket Kit for C-530

PR11509
Product No. PR11509-01

$7.43

Buy Now Find a Store In Stock
Gasket Kit for C-530.
Gasket Kit for C-530 is rated 4.0 out of 5 by 2.
Rated 5 out of 5 by from Lasts A long time if cared for My gaskets have lasted over 2 years, i make sure to clean them and put the proper grease on them every time a clean the filter. The large seal that came with the filter broke after one use, but the one after that has done me good for a long time. The filter has a 3 year wartiy on it, so if your gaskets brakes call them up and they will send you out a new set for free. I theses are getting harder to find, so i would stock up if you find them for sale. the filter is no good without these. oh, i use the C-530 for my 500 gallon turtle tank and it works great! hope this helps.
Date published: 2015-12-28
Rated 3 out of 5 by from Question How long do these gaskets usually last? I have gone through 3 of them.
Date published: 2015-05-24
  • y_2018, m_1, d_20, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_PR11509-01, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland

Need 2x complète gasket kit for c530 ( when i unplug it , it leaks on the floor)

Asked by: William gagne
I apologize, but currently, our site is down. We are working to re-establish it, however, so check back later to order this from our site. You may also want to try www.thatfishplace.com or Big Al's, a Canadian company. BREX
Answered by: BREX
Date published: 2016-10-24

When will you have the c530 gaskets in stock. I have been checking frequently over the last 4 months without luck. I need the gaskets badly

Asked by: Alwyn23
It actually is not out of stock, but is simply not offered for sale on our site. I would recommend trying some of the online vendors; here is a link to a kit online: http://www.thatpetplace.com/canister-filter-o-ring-gasket-kit-for-c-series-530 BREX
Answered by: BREX
Date published: 2016-04-12

why do your 530 main O rings keep failing

Ive been replacing the main O ring on a regular bases. and the new ones are larger than the old one, making it very hard to close. How about selling a silicon grease that goes with the kits.
Asked by: Kojack
Typically, you should need to replace this o ring at most once a year, as long as you are using silicon lubricant after each maintenance, and keeping it clean. We do not manufacture a silicone grease, unfortunately. BREX
Answered by: BREX
Date published: 2015-12-28

C-530 gasket set has no "buy button"

I need to purchase a C-530 gasket set but there is no buy/purchase button on your website. I need these gaskets bad as the large o-ring has broke. My 530 is only 8 mos. old. I just purchased 2 other items I needed to replace. Hopefully you can add this to my order and ship it at the same time. Order # MLW3317980-622. Thank you, Brian
Asked by: Brians
Brain, Thank you for your inquriy. However, we are not able to add this item to the order that you have already placed. Therefore, we will contact you directly via email to send this replacement gasket kit to you as a warranty replacement. MINI
Answered by: MINI
Date published: 2015-11-20

c-530 no directions on when to change gasket kit.

I can tell where the largest gasket goes. I assume the other 2 O rings go on the intake and out take nipples and instructions don't say how often to replace. There are remaining gaskets. Where do they go and how often to change
Asked by: turtleman1948
We recommend changing o rings and gaskets yearly. The two small o rings go on the underside of the valve block. The medium sized gaskets go on the trays. BREX
Answered by: BREX
Date published: 2015-11-02

how long should we expect the gaskets to last?

we have had this filter for about a year and it is leaking and have to replace gaskets.
Asked by: jenniferd
Typically, you should replace the o ring around the motorhead about every 12 months. This will vary, depending on how often you maintain the filter (removing the motorhead creates wear and tear on the o ring) and whether you apply silicon lubricant after each maintenance or not (you should). BREX
Answered by: BREX
Date published: 2015-09-28

How can I get a main canister gasket for a c-530?

I've only had this filter for 2 months and the main gasket had a nick in it when I purchased it. As there were no gasket kits available at that time, I took a chance and put the filter in use. Now after opening up the filter for the first maintenance I noticed it is worse and do not expect it to survive the next time I open it up. This is my sole filtration for my 75gal tank and I love it. But, I must obtain a replecement gasket! Please help! I've spoken to the shops/dealers in my area that you suggest, but they cannot order or obtain. Should I make a warranty claim or what? I've noticed from the questions and answers this has been unavailable for a very long time.
Asked by: GeneS
These are actually not out of stock and haven't been for a while, but I see we don't have a buy button on them on our site, which I will have rectified. The item number is ML90757. Since it was nicked at purchase, you simply need to call us direct and provide us your information and purchase date, and we can send one to you. BREX
Answered by: BREX
Date published: 2015-09-09

how long before I can get a gasket kit for my marineland c-530 canister filter?

Asked by: jerandlisa
We have various shipments coming in throughout the month of May. It should be back in stock soon. BREX
Answered by: BREX
Date published: 2015-05-05
  • y_2018, m_1, d_20, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_PR11509-01, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland