Valve Block for C-360

Valve Block for C-360 Canister Filters
Product No. PR11756

$15.27

Buy Now Find a Store In Stock
Valve Block for C-360.
Valve Block for C-360 is rated 4.0 out of 5 by 20.
Rated 4 out of 5 by from Problem fixed Love the upgrade on the valve with the double O ring much better seal than the old system
Date published: 2016-08-25
Rated 2 out of 5 by from Kinda helped I purchased this valve block because the one that came with leaks constantly when I disconnect it from the filter. I've had to clean this canister at least once a week, it loses pressure after 2 days and slows down to barely a trickle by the end of the second day. I've taken really good care of this filter and have had good luck with marineland in the past but no matter what I replace, I can't get thus filter to perform like it used to....
Date published: 2016-08-02
Rated 5 out of 5 by from C360 valve block I bought a used filter with no valve block. Ordered it and was here about a week.
Date published: 2016-06-12
Rated 5 out of 5 by from cheap at twice the price This valve block is not rebuildable, but at the price so what? My intake side was leaking a cup every 3 minutes, so I replaced the valve block and the cost was $15 for the unit. That is one third the cost of a competitor's analog (I own one of their canisters) and parts delivery was excellent. These things work or they don't. This one was totally leak free upon installation, and I could replace it with every seal refresh for peace of mind.
Date published: 2016-06-11
Rated 5 out of 5 by from valve block Great design. Shuts off water flow when cleaning filter. Doesn't leak.
Date published: 2015-12-21
Rated 5 out of 5 by from Cool! Love these shutoff valves! Makes cleaning a snap! Yep. Love it.
Date published: 2015-10-30
Rated 5 out of 5 by from Nature of the rubber needed replacement It's a replacement part.....what else can I ,say.,....................................................
Date published: 2015-10-20
Rated 5 out of 5 by from Very sturdy easy to install. Replaced old unit will last for years great product.
Date published: 2015-09-16
  • 2016-08-30T09:40CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_en_US, sid_PR11756, PRD, sort_mostRecent
  • clientName_Marineland

Valve block leaks when disconnected. Have to keep a bucket under while cleaning, is this normal ? 

Asked by: Ksmugdog93
No, it should drip a few drops, then stop. Check to see if the valves are closing all the way when you lock it. To do this, flip it upside down after locking it and see if they appear to be open or not. If they are not locking completely, you may need a new valve block. If the filter is less than 3 years old, please call us and we can replace the valve block under warranty.BREX
Answered by: BREX
Date published: 2016-08-23

I only need one collar that attaches the tube to the valve block. What is the price?

Asked by: Tim C
If you are referring to the hose nut, you will need to purchase the valve block in its entirety. Hose nuts are not sold separately. The valve block is available for $25 -$18, depending on where you purchase it.BREX
Answered by: BREX
Date published: 2016-05-05

What diameter for filter hose?

Asked by: Valentin
The C360 takes a 3/4" i.d.BREX
Answered by: BREX
Date published: 2016-03-18

When will parts for the Magniflow canister filters be available from third part vendors (Amazon etc.)?

Asked by: Geno
Many of the C series parts are the same ones for the Magniflow. In the case of the gaskets, however, that is not so. Also, the Magniflow 360 takes a different impeller, and they all take different valve blocks. These parts will begin to sell separately sometime later this year.BREX
Answered by: BREX
Date published: 2016-02-29

Does the Valve Block and Intake/Outlet tube assembly fit the Magniflow 360 Canister?

I have a Magniflow 360 canister ML90751 and I need to replace the valve block and tube assembly.
Asked by: Geno
No, they do not. Please call us at 1-800-322-1266 so we may assist you.BREX
Answered by: BREX
Date published: 2016-02-16

360 Valve Block

Does the valve block stop the water flow when it's disconnected from the canister, or do I have to install an inline valve on the output and return tubes?
Asked by: JimJimmy
It's supposed to
Answered by: Jbkable
Date published: 2015-10-21

outstock

When do you espected to be back on stock??
Asked by: oscie
We receive shipments pretty regularly, so I anticipate it being back in stock within the next week or two.BREX
Answered by: BREX
Date published: 2015-06-22

Valve head C-360 When will they be in stock?

I see the C-360 valve head is out of stock AGAIN. When do you expect more in. Can I pre-order?
Asked by: JimJimmy
These are on order and we expect them to be in within a couple of weeks.BREX
Answered by: BREX
Date published: 2015-05-12
  • 2016-08-30T09:57CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_25
  • loc_en_US, sid_PR11756, PRD, sort_recentAnswersFirst
  • clientName_Marineland