Vinyl Tubing for C-360

Product No. PA11488


Buy Now Find a Store In Stock
Vinyl Tubing Set for C-360.
Vinyl Tubing for C-360 is rated 3.6 out of 5 by 9.
Rated 1 out of 5 by from Disappointed This tubing is good and bad . The good - thick wall construction. However, this I believe caused my problem with micro bubbles . After short period of time , I noticed the tubing got somewhat rigid . Instead of hugging / molding to the shape of the return tube , developed a hairline gap along the seam of the return tube . That is where air is being sucked in causing my problem. I fixed this by replacing with black vinyl tubing I purchased by these guys who call themselves Dr.s . This tubing has the flexibility that shapes itself to a barb fitting or rigid tubing for a true seal . My Magniflow 360 is the best canister I have ever owned . Since I literally have no air getting back into the canister, this unit runs super quiet.
Date published: 2018-05-24
Rated 3 out of 5 by from Question! I have 350 magnum filter. I was wondering if this hose will fit my filter?
Date published: 2018-05-06
Rated 4 out of 5 by from quality product it's good product, shipping was very quick my only gripe is it's a bit stiff and likes to pull the suction cups off the tank holding the intake and outtake.
Date published: 2018-01-26
Rated 5 out of 5 by from Built to last I bought some vinyl tubing for my C360 filter. This isn't the first nor the last time i will buy Marineland tubing. I've used Marineland products for as long as i can remember. Like anything, some products are better than others. Marineland stands behind their product, and has built quality filters and equipment for all the years I've had aquariums and bred fish. Manufacturers will come and go, stick with a brand that sticks around.
Date published: 2017-11-22
Rated 3 out of 5 by from Why so stiff?? The tubes are very durable tubes. But almost to a fault!! The tubes on my Fluval 406 are soooooo much easier to bend!! Highly recommend putting them in a hot car before you try and manhandle the tubes into their final position.
Date published: 2017-04-18
Rated 5 out of 5 by from Excelant quality First one I bought lasted over two years and only replaced it because of the dirt build up. Great quality and longer then needed. Easy to cut with a rasor knife and easy to install. Highly recommend.
Date published: 2016-04-11
Rated 5 out of 5 by from Excellent quality Every product I have ever used from Marineland has met or exceeded my expectations.
Date published: 2015-08-07
Rated 5 out of 5 by from Tubing is strong and flexible enough... Perhaps the tubing can benefit from and internal anti fungal coating to make it perfect.
Date published: 2013-09-27
  • y_2018, m_10, d_13, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_PA11488, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland

How lone is this tubing?

Asked by: Siu Moy
This tubing is 6 feet long, Siu Moy. BREX
Answered by: BREX
Date published: 2018-08-20

i have magniflow 360, is the c-360 the replacement part? great product (i've bought several over the years)

Asked by: Tor Eckman
For tubing, yes, it is the same. Some parts are not the same, like the impeller and valve block. BREX
Answered by: BREX
Date published: 2018-06-11

I have a magnum 350 what size tubing do I need?

Asked by: Angie_78
You need 5/8" ID. BREX
Answered by: BREX
Date published: 2018-05-22

what is the length

Asked by: bosstl
It is 6 feet long, like the tubing that originally comes with the filter. BREX
Answered by: BREX
Date published: 2018-01-29

will the replacement vinyl tubing for the C-360 fit the C-220 ? When do you expect to have the C-220 in stock?

Asked by: mkpoe
No, it is too large. You can buy tubing by the foot from DIY hardware stores. Just check the plumbing section. You need 5/8" tubing ID. Within a few weeks. BREX
Answered by: BREX
Date published: 2018-01-11

Is this one tube, or two?

Asked by: Jeffy
It is one length of tubing, 6 feet long. BREX
Answered by: BREX
Date published: 2017-10-30

How can we clean the inner portion of the tubing? Mine is all mucked up and the flow rate of the filter isn't nearly what it was when I first bought it.

Asked by: Ro0ster
That can be tricky to do, but you can soak it in a bucket of hot water mixes with distilled vinegar, a 50/50 solution. Make sure you submerge the tubing by hand, until it has filled up and all air has been expelled, then soak it for at least an hour. Rinse well, inside and out, with hot water. You can also attach a soft cloth, soaked in vinegar, to a long wire, and pull it through. BREX
Answered by: BREX
Date published: 2017-11-04

I'm looking for a double disconnect valve for my C-360 vinyl tubing. What size of valve would you recommend? 1/2" or 5/8"?

Asked by: Oldfart in WA
The C-360 does not take a double disconnect valve, it takes a valve block, and the tubing it requires is 3/4" ID. BREX
Answered by: BREX
Date published: 2017-05-23
  • y_2018, m_10, d_13, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_32
  • loc_en_US, sid_PA11488, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland