Vinyl Tubing for C-360

PA011488
Product No. PA11488

$13.20

Buy Now Find a Store In Stock
Vinyl Tubing Set for C-360.

what is the length of the replacement hose that I am buying

Asked by: dmbill
One length of six feet. BREX
Answered by: BREX
Date published: 2017-04-03

Will this fit a magniflow 360 filter?

Asked by: PhillipC2020
Yes, it will fit the new Magniflow 360 filters. BREX
Answered by: BREX
Date published: 2017-06-04

What is the hose size? It looks like a 5/8's ID. Can you tell me what size it is? I'd like to use an inline heater and need to purchase the right size heater matched to the hose diameter I need

Asked by: Frank2
The ID for this tubing is 3/4". Please let us know if you have further questions. BREX
Answered by: BREX
Date published: 2016-12-13

Are there any glass lily pipe fixtures that will fit this tubing? or something offered by marineland that isn't noticeable?

Asked by: Rose23
Thank you for your question. The I.D. on the tubing is 160 and 220 tubing is 5/8", the 360 is 3/4"; perhaps that will help you find something that will work to your satisfaction. Marineland does not manufacture anything for this purpose besides the tubing. BREX
Answered by: BREX
Date published: 2016-11-21

what is the diameter of the tubing for the c-360??

Asked by: Lestrux
Thank you for your question! It is 3/4" I.D. BREX
Answered by: BREX
Date published: 2016-11-08

Do you sell the shut off valves and quick disconnect for the C-360 like the valves for the Magnum 350?

Asked by: Lestrux
The C360 does not have shut off valves and quick disconnects, it utilizes a valve block which sits on top of the motorhead, and yes, that part is sold separately on our website. http://www.marineland.com/Products/aquarium-parts/Filtration-Products-and-Skimmers/C-Series-Canister-Parts/Valve-Block-for-C-360-Canister-Filters.aspx BREX
Answered by: BREX
Date published: 2016-11-08

Is it just one tube or two when you order it. I can't tell from the picture and it doesn't say.

Asked by: JohnC522
Two pieces of tubing, 6 feet long each. BREX
Answered by: BREX
Date published: 2017-09-22

What is the total length of the tubing?

Asked by: Amarin2592
6 feet per piece. BREX
Answered by: BREX
Date published: 2016-08-15

Will this fit my marineland magnum 350 canister filter and how many feet long is this?

Asked by: Jason3081
No, it will not as it is 3/4" and you Magnum 350 requires 5/8". It is two sections of 6 feet each. You can buy tubing by the foot at a DIY hardware store in the plumbing section. BREX
Answered by: BREX
Date published: 2016-06-07

is this tubing a set of two for this cost or each

Asked by: tazman
It is a set of two pieces of tubing. BREX
Answered by: BREX
Date published: 2016-06-05

What are the dimensions of the c360 tubing

Asked by: Jeenotes
Good afternoon, The C360 tubing is 3/4" ID. Thank you, MINI
Answered by: MINI
Date published: 2016-03-30

HOW LONG IS THIS HOSE AND WHAT IS THE ID PLEASE

Asked by: JIMR1453
3/4" id and each piece is 6 feet. BREX
Answered by: BREX
Date published: 2016-06-05

What size is this hose?  Do I need 2 of them to replace the hoses on C-360?

Asked by: Granite
The Canister 360 has a 3/4" ID tubing that is included with the unit. MINI
Answered by: MINI
Date published: 2016-03-11

Is the listing for the 360 Cannister tubing for one or two tubes? Or is the tube meant to be split into two pieces? How long is the tubing?

There doesn't seem to be much of a product description or I have missed it. It does say "set" of tubing but that does not indicate to me if it is enough tubing for both intake and output. Please advise.
Asked by: windrizon
It is two 6 foot lengths so you have an intake and an outlet tube. BREX
Answered by: BREX
Date published: 2015-10-12

How do I clean this pipe for my c-360?

I'm looking to clean the pipes as they have gotten clogged, what is the best way to clean them or should I jut get them replaced?
Asked by: Jazzy3175
You can try to attach a small soft cloth to a metal coat hanger, that is stretched out and pull it through. You can also coil it and place it in a bucket of hot water and distilled white vinegar. Or you can buy new. BREX
Answered by: BREX
Date published: 2016-06-05

350 magnum

I am looking for replacement tubing for my 350 magnum filter. The link in the previous question goes no where. Do you carry tubing that will fit my filter?
Asked by: Bil2112l
The tubing for the Magnum 350 is a standard 5/8". We do not sell that direct. You can buy it by the foot through local hardware stores. They would carry it in the same section as pvc pipe. BREX
Answered by: BREX
Date published: 2014-12-03

will this fit my magnum 350

Will this tubing fit my magnum 350 pump. And how long is it?
Asked by: sherrymb9629
No, it will not. The Magnum 350 requires 5/8" id. The C360 requires 3/4" tubing. We usually sell tubing in 6 foot lengths. You can purchase tubing at a hardware store, by the foot, in most any i.d. BREX
Answered by: BREX
Date published: 2014-04-03

will this fit the c220?

Your out of stock on the c220 tubing...will this tubing work?
Asked by: cory6565
No, the C-360 uses tubing that is 3/4" ID whereas the C-160 and C-220 uses tubing with a 5/8" ID. This item is currently out of stock through us but should be back in stock the first of March. Marineland2
Answered by: BREX
Date published: 2014-01-27

530 Intake Tube set

Hi I see your outa stock on the intake tube set for the C-360 so Im wondering if the intake tube sets from the C-530 will fit the hoses on a C-360
Asked by: Darc
Great thinking, but unfortunately, the C-530 tube set will not retrofit the C-360 as the tubing sizes are different diameters. We are currently out of stock on this item, but I will email you retailers of our product line that will be able to ship this out to you. Marineland2
Answered by: BREX
Date published: 2014-01-27

I own a 350 Pro and need to replace intake and outlet tubing. Can you tell me what size it is, and if you carry it? Thx

Asked by: RLC1386
It is the same as the PCML 220 tubing and is 5/8". And yes, you can order it here....http://www.marineland.com/Products/aquarium-parts/Filtration-Products-and-Skimmers/C-Series-Canister-Parts/Vinyl-Tubing-for-C-160-and-C-220-Canister-Filters.aspx BREX
Answered by: BREX
Date published: 2013-10-22

what size is this tubing ? I/d & when do you expect it?

I need to extend the tubing on my current pump and would rather use original Marineland parts when do you expect them in and what size tubing is it ?
Asked by: Terry2787
It is 5/8". We expect some new tubing in with in the next two weeks. It is perfectly acceptable to buy tubing by the foot at your local fish store, a Lowes, or Home Depot. BREX
Answered by: BREX
Date published: 2013-10-22
  • y_2018, m_4, d_18, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_29
  • loc_en_US, sid_PA11488, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland