Impeller Assembly - DJ100

Product No. ML0048016


Buy Now Find a Store In Stock
Impeller Assembly - DJ100.
Impeller Assembly - DJ100 is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Just What Was Needed Happy I could find one of these impellers. After several years, I opened up the box for a Duetto 100 filter and took it out to use it for the first time and it wound up the impeller was broken. I have four other of the same filters and they have been working well for at least 5 years each with no problems. Anyway, the new impeller was the fix and it has been working like a charm. The only negative besides the original being broken was that the two new ones I ordered came in clear plastic packages that were dirty filthy as if they had laid atop a shelf for the last few years. It would have been nice if they had wiped them off before putting them into the shipping box.
Date published: 2017-07-24
Rated 5 out of 5 by from excellent circulatory characteristics I first purchased the DJ100 filter over 20 years ago. Recently, I noticed the protective coating wearing off the impeller. It seems that as the protective coating began wearing off the impeller would sometimes stick and stop spinning. I am hoping that I can buy replacement impellers and that a new impeller will correct the sticking problem.
Date published: 2015-03-29
  • y_2018, m_10, d_16, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_ML0048016, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland

Does this fit the s model 220 50 gallon tank?

Asked by: Uptagrafft1964
No, this is a small impeller for a discontinued internal filter. If you have the C220 for up to 50 gallon tanks, you need: BREX
Answered by: BREX
Date published: 2018-09-25

need impeller assembly for model c-360 (prim360)

Asked by: Rodolfo
Here you go: BREX
Answered by: BREX
Date published: 2018-09-18

I have 2 new Marineland 400 bio-wheel filters. One of the filters has a very loud noise coming from the impeller. I took it all apart according to the directions, reinstalled the impeller but it is still very noisy. The other one is very quiet.

Asked by: Frank 400
Do you happen to have sand in the tank? If so, make sure you clean the sand out, and install a foam accessory over the bottom strainer. If not, but you have a bubbler in the tank, shut the bubbler off for a few hours and see if that helps remove the noise. Make sure you check for anything caught in the motor area as well. If you are unable to resolve the issue, there is a 5 year warranty on this filter, with receipt. We also sell the impeller separately. For warranty, call 1-800-322-1266. BREX
Answered by: BREX
Date published: 2018-08-28

I have a SeaClone 100 Protein Skimmer. Is this the correct impeller? Thank you.

Asked by: SylH
No, you need the one for the MaxiJet 1200 Pro. BREX
Answered by: BREX
Date published: 2018-05-22

Is this item compatible with the prim200b?

Asked by: Sonny 01
No, it's not. Why don't you just order the PRIM200b? BREX
Answered by: BREX
Date published: 2018-05-22

Will this fit the pump for the 40 gallon eclipse aquarium

Asked by: Chas3519
No, not at all, Chas3519. This is for a tiny internal filter system. Here is the pump you need: BREX
Answered by: BREX
Date published: 2018-04-30

With this, the holder the white stick in the middle

Asked by: Josefina
Good question. This is an old impeller for a discontinued filter that hasn't been around in years. In general, yes, our impellers include the shaft. BREX
Answered by: BREX
Date published: 2018-04-24

Will it work for a c360 Canister

Asked by: Perez
No, not at all, as this is for a very small, internal filter. You need: BREX
Answered by: BREX
Date published: 2017-07-27
  • y_2018, m_10, d_16, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_en_US, sid_ML0048016, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland