Pump Motor Assembly - PFE1

PR3080
Product No. PR3080

$35.14

Buy Now Find a Store In Stock

Pump Motor Assembly for the Eclipse® PFE1.

Note, this is for the motor assembly ONLY. Does not include other parts such as impeller, caps, tubes, etc.

Pump Motor Assembly - PFE1 is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from I still need a filter for the bottom! My old pump was working fine, I think I just needed a new sponge filter that attaches to the bottom, because my old ones block all the water flow. The filter didn't come with the new pump. Where can I get just the sponge filter?
Date published: 2018-05-21
Rated 5 out of 5 by from KEEPING HER GOING I WAS SO GLADE TO BE ABLE TO REPLACE THE PUMP ON THIS 15+ YEAR OLD AQUARIUM FILTER LIGHT COMBO SYSTEM,THAT HAS ALWAYS WORKED GREAT.
Date published: 2017-12-19
Rated 5 out of 5 by from Saved a great hood Great way to refurbish an old hood. The Eclipse has a great clean look, glad I am still able to use it.
Date published: 2016-06-04
Rated 5 out of 5 by from This was a hard item to find which I really needed... Great service, Thanks for the speedy delivery......A+
Date published: 2015-03-22
Rated 5 out of 5 by from High quality product you can depend on. The original Eclipse System I bought for my existing aquarium has been working perfectly for 5 years +. The filter motor burned up when we had an electrical storm and power surge while we were away. Needing a replacement fast before my fish perished I ordered the replacement parts and was delighted with the fast delivery and excellent performance. I love this Eclipse Unit and the fast response of Marineland's delivery.
Date published: 2014-09-15
  • y_2018, m_12, d_13, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_PR3080, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland

Where can I find a full set up with impeller pump and caps

Asked by: Jim dawson
Here is a link to the page with all parts that are still available for the Eclipses 1, 2 and 3. If the part you need is not on this page, it is no longer available. http://www.marineland.com/search.aspx?q=eclipse#/?filter.brand=Marineland. BREX
Answered by: BREX
Date published: 2018-12-05

Hi. How can I quiet the impeller on the pfe1?

Asked by: Ronpro
If you have not replaced it since you purchased it, you may need a new impeller. http://www.marineland.com/Products/aquarium-parts/Filtration-Products-and-Skimmers/Eclipse-Filtration-Parts/Magnetic-Impeller-Assembly-Black-for-Eclipse-PFE1.aspx. If it has been replaced, you might try soaking it in vinegar and cleaning the inside of the pump with vinegar. BREX
Answered by: BREX
Date published: 2018-06-25

Hi, I bought a new pump. My old pump was working fine, I think I just needed a new sponge filter that attaches to the bottom, because my old ones block all the water flow. The filter didn't come with the new pump. Where can I get just the sponge filters?

Asked by: 1111
We do not make a sponge filter for this system, actually, and never did. The system was discontinued about 5 years ago as well. There are a number of sponge filters on the market, so we aren't sure which one you used. BREX
Answered by: BREX
Date published: 2018-05-22

I have a small older Eclipse aquarium. I need a complete pump/filter for it. How do I tell if it’s a 1, 2 or 3? Can I still get all the parts I need?

Asked by: Fishlove18
The model information is molded directly into the pump/filtration assembly itself. Here are all the parts we have available on our older Eclipse systems: http://www.marineland.com/search.aspx?q=Eclipse#/?filter.brand=Marineland. BREX
Answered by: BREX
Date published: 2018-06-23

How far do's pump set in water

Asked by: mikey 24
The bottom half of it basically sits in the water. BREX
Answered by: BREX
Date published: 2018-01-15

on the motor itself we found a serial number do you have a serial number for your parts

Asked by: sprinkles
No, we typically put the lot code on the motor, as well as the model information. Most Eclipse parts are out of stock, however, since they have been discontinued for quite some time. BREX
Answered by: BREX
Date published: 2018-01-15

Trying to put impeller back in filter and housing but doesn't close as though impeller is too long, but it's the same one that was in it. Am I missing a piece to filter part? I couldn't find any part that fell out in aquarium.

Asked by: Cinny
Connect the impeller to the housing cover first. Blades go into the housing cover, then push it up into the pump with magnet end going in first. If it will not fit, look inside pump for any warping. BREX
Answered by: BREX
Date published: 2018-01-15

What part I need to buy?

I was given a 10 or 12 gallon tank. It is an eclipse 1 (10x20") but it has no filter system. Can I buy a whole set?
Asked by: Greatp07z
Judging by the dimensions, it is probably the Eclipse 1. You would need to buy the pump/filtration assembly, impeller, impeller housing/cover, intake tube, strainer, biowheel, and biowheel bearings. Oh, and the flexible motor mount. Parts can be ordered here: http://www.marineland.com/search.aspx?q=pfe1#/?filter.brand=Marineland BREX
Answered by: BREX
Date published: 2018-01-15
  • y_2018, m_12, d_10, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_US, sid_PR3080, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland