Extension Tube with Coupler

PA1591
Product No. PA1591

$2.81

Buy Now Find a Store In Stock
Extension Tube with Coupler for the the HOT Magnum® PC250.
Extension Tube with Coupler is rated 4.3 out of 5 by 4.
Rated 5 out of 5 by from Love the fact that I can get replacement parts! Bought the original about 10 years ago and have replaced many parts.
Date published: 2017-10-21
Rated 4 out of 5 by from pros/conns This did exactly what I needed. I have a 90 gal and without the extension I was not getting the flow I needed. I found that the tubing cut for the connector was a bit bent (probably from a loop of hose) and it has a slight kink and is not exactly straight after assembly. I hope in time the tube will relax and straighten everything out.
Date published: 2015-05-25
Rated 3 out of 5 by from Did not fit I have two vacuums on the older one over 20 years the product fit as advertised. On the newer product, I brought less that a month ago new, the Extension tube coupler was too big, and further the extension was too big to hold the cage on.
Date published: 2014-12-18
Rated 5 out of 5 by from awesome Love my magnum filter, its awesome that parts are available
Date published: 2014-07-16
  • y_2018, m_1, d_22, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_PA1591, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland

Brex, Do you make a extension tube for the outlet on the HOT Mag 250HSB? If not describe how I can extend it with flexible tubing as you describe in your last question answered.

Asked by: MikeJS
As I already answered this question, no, we do not make such an extension. You simply push vinyl flexible tubing up onto the outlet tube, once you remove the diffuser. I would recommend using a hose clamp to secure it. BREX
Answered by: BREX
Date published: 2016-03-23

Will this part work to extend the output tube on the HOT Magnum 250?

Asked by: Anonymous
No, this is specifically for the intake. The outlet tube would be too large for this. Plus, it is a S shape. Most people attach flexible, vinyl tubing to it to extend it down, like in turtle tanks. BREX
Answered by: BREX
Date published: 2016-03-22

Extension tube with coupler

Length of extension? Does it fit a 20 yr. old Magnum 350? Does intake strainer PFE1 fit this extension. Thank you, Dannie
Asked by: Dannie
No, it does not fit a 20 year old Magnum 350. Unfortunately, we do not sell an extension tube for the Magnum 350. BREX
Answered by: BREX
Date published: 2015-10-02

PA1591 extention coupler

would like to purchase three but site only allows the order of two, any ideas
Asked by: toekra
Usually, that means that we are going to go out of stock. You could try other sites such as www.petsolutions.com or www.aquariumguys.com. BREX
Answered by: BREX
Date published: 2014-11-10

part # pa1591

when will this part be avaiable
Asked by: akimak
Well, I have spoken to the folks in Planning and do not have an ETA but I can definitely say it is going to be a while. BREX
Answered by: BREX
Date published: 2014-05-17

I need an replacement ext. tube for my MAG. 350 i don't see one listed do you offer one or can i use the one listed for the ''HOT MAG.'' ?

Asked by: SPECTRE2025
It is item PA1341, and no, the one for the HOT Magnum will not work. It is the one for the larger Eclipse systems. BREX
Answered by: BREX
Date published: 2013-10-22

Can I use this to connect with my intake tube c-220 as an extention tube? Will it fit?

Asked by: Turtle123
No, it is only for the Hot Magnum. BREX
Answered by: BREX
Date published: 2013-10-22

The connections need to be sealed or under water?

My use for this is to run the pipe near the bottom of a tall garbage can that I use for salt water reserve water. When I take water out to do a water change, the water line drops low enough to allow the existing pipe to suck air. So when you say sealed and/or underwater, I assume you mean so air is not drawn in at the junction? What would I use to seal the joint? Silicon it together? What ever I use needs to be safe for a marine tank. thanks
Asked by: DennisB
Yes, exactly. Without sealing the connection areas you will suck air in and create a vacuum, instead of a siphon. Silicon sealant for aquariums works perfectly for these types of applications and obviously would be non-toxic, even to marine life. BREX
Answered by: BREX
Date published: 2013-10-22
  • y_2018, m_1, d_22, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_PA1591, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland