Impeller/Shaft Assembly

PR1472
Product No. PR1472

$5.52

Buy Now Find a Store In Stock
Impeller/Shaft Assembly for the Magnum® 350.  Magnet not included.
Impeller/Shaft Assembly is rated 4.7 out of 5 by 6.
Rated 4 out of 5 by from Great coustomer service Shipping was more than the part , But great coustomer service
Date published: 2017-01-02
Rated 5 out of 5 by from Impeller with magnet We purchased both the impeller and magnet. Together they have fixed my pump/filter ... great products.
Date published: 2016-11-30
Rated 5 out of 5 by from great parts The Product i bought wasn't that big but it was sent on time and it was the right part just as ordered. for once i got exactly what i needed. i will give the sites name and addy so my friends can order as i did. thanks so much for being a com. that has a safe credit card payment as well .. as io said thanks again i will be cack for more parts when needed
Date published: 2015-06-07
Rated 5 out of 5 by from I enjoy dealing with a company that knows what they are doing. Great quality in their products. The impeller shaft is of a great design. Magnet fits superb. I enjoy dealing with quality products. I do all my own repairs and and I like quality products
Date published: 2014-12-29
Rated 5 out of 5 by from Easy to install and works great! The original impeller for our Magnum 350 filter lasted for two years and through many drops. Finally after losing 2 blades it was time to replace it. The new impeller installed easily and the water flow is back at maximum flow!
Date published: 2013-10-31
Rated 4 out of 5 by from price was a little high but everything else seemed good I thought that the price was a little high but the product in general was really good and is working as good as new.
Date published: 2013-08-01
  • y_2018, m_1, d_19, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_PR1472, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland

I have a Magnum 220. Will this impeller fit/work with my canister filter?

Asked by: Ed46
No, it will not. That part is no longer available. BREX
Answered by: BREX
Date published: 2017-12-20

Can you just get the rubber ends for this item

Asked by: laur
No, you would need to order the entire impeller assembly. BREX
Answered by: BREX
Date published: 2017-04-20

Will this work with a magnum 330?

Asked by: kbdron
Unfortunately, no, it will not, and parts are no longer available for the 330. BREX
Answered by: BREX
Date published: 2017-04-03

will this work with the magnum 220?

Asked by: brando
No, it will not. The impeller you need is no longer available. BREX
Answered by: BREX
Date published: 2016-03-10

BioWheel 100 impeller

I was told I need a new magnet for the impeller assembly on my BioWheel 100. I see only one magnet on the website. Is this an instance of "one size fits all"?
Asked by: Sefcikprod
No, each filter has its own unique impeller, and they are all sold through our website. If you have a "biowheel 100" the correct name for your filter is Penguin 100, most likely. Here is the link: http://www.marineland.com/Products/aquarium-parts/Filtration-Products-and-Skimmers/Penguin-Parts/Impeller-Parts/Impeller-Assembly-Penguin-100B.aspx BREX
Answered by: BREX
Date published: 2015-04-03

Replace impeller and magnet

I have a magnum filter. Bought a new impeller without the magnet (my old impeller has a perfectly good magnet). Is there a trick to getting the magnet off the old impeller and putting it on the new one. It doesn't seem to just slide off the old impeller and I didn't want to force it.
Asked by: IraLin
If you look at the middle of the assembly, where the two parts join, you will see two white "tab" or hooks, that extend over the side of the magnet. You need to lift those two up at the same time, and pull the magnet down. BREX
Answered by: BREX
Date published: 2015-04-03

Does this fit the Magnum 350 pro?

I am trying to replace a cracked canister and impeller on a magnum 350 pro
Asked by: Litzi
My link is not working right, so I cannot see what you attached, but it states it is from magnum parts, so I think it is correct. It would be PR1472. B-Rex
Answered by: BREX
Date published: 2014-03-07

Impeller is out of stock? How long of a wait? Can you suggest another source for this Impeller in meantime? Thank you.

Asked by: ljwjr
I'm not showing that it is out of stock today, so it may have just come back into stock this morning. B-Rex
Answered by: BREX
Date published: 2014-02-19
  • y_2018, m_1, d_19, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_PR1472, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland