Impeller for NJ3000

Product No. ML0073012


Buy Now Find a Store In Stock
Impeller for NJ3000 Submersible Utility Pump.

Is njs3000 the same as nj3000

Asked by: Marks fish
Yes, it would be. BREX
Answered by: BREX
Date published: 2018-02-27

is there a way to buy just replacement ends that go on each end of this shaft ?

Asked by: Salty45
Unfortunately, no, you would need to buy the entire impeller. BREX
Answered by: BREX
Date published: 2017-01-25

Marineland 305 skimmer

Pump in skimmer quit working so I took pump apart and can't find anything wrong but still won't work.I was pulling shaft out and it broke off. Can I get new shafts for it and how do I go about removing rest of the shafts stuck in the cavity? I ran vinegar through it as well. Thanks for your help
Asked by: Brownclown
We do not have a skimmer that is called 305. We manufacture the Seaclone 100, and Seaclone 150. If it is one of these skimmers, you would need to just buy the impeller for the Maxi Jet 1200 in order to get the shaft. If the shaft is stuck inside, then you would need a new Maxi Jet 1200, again assuming it is one of these skimmers. To remove the broken shaft, try needlenosed pliers I guess. Since I have not had the opportunity to see what the shaft looks like or how badly it is broken off, etc, I'm not sure what to recommend. BREX
Answered by: BREX
Date published: 2016-02-17

will this NJ3000 impeller assembly fit into an NJ1800 pump without changing the front plate?

Asked by: LeoB
No. The pump would not power it properly either. BREX
Answered by: BREX
Date published: 2013-10-22
  • y_2018, m_10, d_19, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_ML0073012, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_marineland