Can I get the exact base dimensions of the 150DD tank? Mine is on order from you and I am building a custom stand for it. I need to know the exact base dimensions including the bottom bezel.
Those are: 72-1/2 x 18-5/8 x 26-15/16
Keep in mind that custom stands reduce the warranty from a limited lifetime one to only a one year warranty on the tank and nothing else.
Date published: 2016-08-31
How tall is the canopy for a 180/220 (72"x24") and how tall is the stand from floor to the top where the tank will sit (30", 36", etc)?
Our Monterey canopy is 11.5" tall and the stand is 34.5" tall. The Majesty stand is 28" tall, and there is no canopy.
Date published: 2016-04-27
Can the 300 gallon DD tank be special ordered with no holes or overflows? I wish to install an external overflow on my own by drilling two 2" holes in the back panel and two 1-1/2" holes for returns. Also would like low-iron glass for the front panel.
No, we do not do any customer orders. The 300 gallon tanks all come with the low iron, ultra clear glass on the front panel, but we do not sell any without overflows any longer.
Date published: 2016-04-21
Can you email plumbing guide or instructions for dual corner overflow tank Thank you
Sure! I will do that immediately.
Date published: 2017-01-27
Can I order a fish tank from marineland
Unfortunately, no, we do not sell direct. You would need to order one through a local fish store. To find one near you, visit our Store Locator and enter your zip code.
Date published: 2016-04-14
Do you recommend putting any sort of liner/mat/cushion between the tank and the stand?
Actually, no, we do not. This can make the tank off balance, and not allow the stand to properly support the tank.
Date published: 2016-05-26
Am I able to order a large tank from marineland and have it shiped
Unfortunately, no, we do not sell direct and cannot ship tanks direct. Tanks do not do well when shipped via UPS or Fed Ex. They are best shipped via freight with shrink warp, cardboard, and other product around them. Click on the Buying Options tab on our site, then the Find a Store link. Enter your zip code to locate a local fish store near you. These are the types of stores that can do a special order for a large tank.
Date published: 2016-04-11
Can I get a CAD drawing for exact hole locations for the overflow and return holes on the 300 gallon? Thanks
Yes, I will email that to you directly.
Date published: 2016-04-05
My question is regarding the HEIGHT of the Perfecto/Marineland Monterey stand, in the 84 x 24 size, accommodating the 265 g tank size?
Thank you for your inquiry. The overall height of the 84x24 Monterey Stand is 34.5".
Thank you again,
Date published: 2016-03-29
Is it possible to get the 150 deep dimension with a dual overflow? Because a MAXIMUM flow rate of 700gph is pitiful on a 150. I have a Marineland 93 Cube Tank that has the same spec'd overflow, yet the 150 is almost DOUBLE the size!
Thank you for your inquiry. You have the 150XH tank (48x24x30), which comes with one overflow kit. The standard 150G tank (72x18x27) that is deep dimensions or marine ready has 2 overflows manufactured into the tank.
Date published: 2016-03-28
Hi there I have a tank I purchased from another individual it's a 72X18x27. The tank is a Marineland tank and is drilled in the corners for overflows. Previous owner removed them. I need to purchase two of your corner overflows and piping for this tank..
Thank you for your inquiry. We are very sorry to hear this and would be glad to assist you as a courtesy. We will be emailing you directly for more information.
Date published: 2016-03-28
Do you sale the canopy and stand only? I have a tank but my canopy and stand was damaged in a move
Yes, they are sold separately through local fish stores. In many cases, you will need to special order them as they are a premium style and not a standard stocking item.
Date published: 2016-03-23
Are the ends tempered?
None of the panels are tempered on any of the Deep Dimension tanks. Any drilling will void warranty.
Date published: 2016-03-22
can you tell me on a 300 dd reef tank,how far are the overflow holes drilled from the face of the glass. Both return and feed.also can you tell me are the over flows 1 inch pipe and if so do you recomend going to the sumo with 1.5 pipe thanks
I can do one better, I will email you the CAD drawing for the overflows, and our plumbing guide.
Date published: 2016-03-21
My question should have said.. Can I get a diagram of the cornerflos on a 300G DD? LOL
Yes, you sure can! I will email them direct.
Date published: 2016-03-21
Is the glass clear on all four sides, or is there a background on the back?
It is clear, we don't put backgrounds on our tanks.
Date published: 2016-03-17
I have a 300 DD w/Monterrey Stand. I also have a trigger system 64 gallon sump. The sump will nit fit into any of the openings because of 3 2" pipes where the drain plumbing fits the sump. Can I remove and replace the center brace in back of stand?
No. For one thing, this voids the warranty on the stand because you would be altering it. Secondly, removing the brace would compromise the integrity of the stand and the tank.
Date published: 2016-03-09
I just purchased a 300G DD. I will be using it as a salt water reef tank. Generally you want to turn the tank water volume over 10x per hour, resulting in a flow rate in the neighborhood of 3000gph. Is it correct that each corner-flo only does 700gph?
Yes, that is correct, each overflow has a maximum of 700-750 gph.
Date published: 2016-03-08
Price of a deep dimension 150 is what?
That would depend on who you buy it through, what you add with it, type of stand, etc. We do not sell direct.
Date published: 2016-03-07
Where can I order this setup and how much is it? 200g 48"x36"x27"
I'm interested in the 200 gallon 48"x36"x 27" with stand and canopy, also I'm wondering where and if I might be able to just order stand and canopy in which case how much would just stand and canopy cost.
All of your questions depend on where you live. Visit our site again, and click on Buying Options, at the bottom of each page. Go to the store locator and enter your zip code to find a store in your area.
We do not sell direct, and you will need a local fish store, not a large chain to order from.
Date published: 2016-02-13
what flow rate canister pump in each corner do I need for 300Gal DD
what flow rate canister pump in each corner do I need for 300Gal DD
I do not know of one large enough on the market that would suffice for a 300. You need to move between 2100 and 3000 gallons per hour, going by the usual recommendation of moving 300 gallons of water 7-10 times per hour. Even the C530 would only move 1,060 per hour if you had two of them. Most people with these really large tanks use sumps or 2 canisters at each end. But, all of this depends on what you will be keeping. If you are planning a marine tank, live rock and a protein skimmer will help tremendously.
Date published: 2016-02-04
200 gallon deep dimension back width between overflows
How wide is the glass in between the two overflows on the back of the 200 gallon deep dimension tank? I know the total width is 48 inches, I am trying to figure out what the distance is between the two overflows to make a cutout in my wall for viewing. Thank you!
As per our engineer, it is 29-7/16" between the overflow panels. However, he said this can vary as much as 1/4" and recommended that you make the opening in your wall a little smaller to ensure not viewing the plumbing.
Date published: 2016-01-27
Can I use schedule 80 bulkheads on the 300G DD tank?
I just purchased a 300G DD aquarium, and I am looking to see if I can use schedule 80 buklheads instead of schedule 40. The hold size is slightly larger.
Generally, Schedule 80 bulkheads of the same size designation will require larger holes, so they likely won’t fit. If you went with smaller bulkheads, you’d restrict flow. The use of Schedule 80 plumbing is generally overkill. Aquarium plumbing has open systems and never build up higher pressures that closed systems do.
Date published: 2016-01-21
What are the dimensions and hold sizes for the current starphire 300G DD
I am about to purchase a 300G deep dimension aquarium. I have seen prior posts about this information, but it is a year old, and these things can change. I would like to know the actual dimensions of the tank, including the rim bracing. Also, I have seen videos about this unit having 3 drains, but there are only two cornerflo's. Can you verify the number of returns and drains, as well as their drilled sizes?
There are two corner flows with one return and one drain each. Here are the tank dims:
72-3/8 x 36-1/16 x 27-1/4
Nothing has changed regarding the dims. Bulkheads are 1".
Date published: 2016-01-19
150DD Plumbing kit
How can I buy a new plumbing kit for my DD150? I can't seem to find it in the parts section.
Those are not readily available. You would need to have a local fish store that can place special orders through their distributor.
Date published: 2016-01-18
What is the warranty on your deep dimensions tanks?
What does it cover? What doesn't it cover? And what voids it?
Limited Lifetime Warranty as long as it is on a manufactured aquarium stand. Cannot be altered in any way like drilled, etc. If you use a custom stand, you have a one year warranty only on the tank. And again, the tank cannot be altered.
Date published: 2016-01-15
200DD stand question
What advice do you have, 200DD I see people putting 1/2 foam under these tanks, I bought a 18month old tank and fixing to set up, should I put a plywood top and foam on stand or not ? stand came with tank and I'm told it is marineland stand, well made with a green/white bar code tag stuck on stand and same on canopy. Any advice on this is appreciated
We do NOT recommend using something under the tank. This is not only unnecessary, but could interfere with the proper support of the pressure points of the tank. If you have a Marineland stand it should have a sticker on it with a ship's anchor. If you'd like to know for sure, email us a picture of the bar code and we can check for you. Put For BREX in the subject line.
Date published: 2016-03-02
250g DD tank and Monterey stand dimensions
Hello and Happy New Year!!
I’m currently in the process of setting up to purchase your 250g dd tank and Monterey stand and I have a couple of questions. 1) I’d like to see if you could give me the exact exterior and interior dimensions of the stand and tank? 2) How many braces are in the front of the tank stand? 3) With my current 165 g setup I have a skimmer and two reactors in a very tight space. With your stand, is there extra room for additional equipment along with a 40g sump including height space for skimmer cap removal? 4) Finally, I like the setup of your sump, can you send me the dimensions on that as well..approximately how thick is the acrylic?
Any pictures or drawings you could provide would be appreciated
The stand dimensions:
exterior: 62.125 36.875 29.000
interior: 57.750 32.875 25.500
We no longer make sumps at all. One center section in front.
Date published: 2016-01-08
I'm thinking about buying a 300 gallon DD and wanted to know how many out of a 100 require a warranty claim?
I am sure that you keep quality metrics and I would like some insight into the reliability of these larger tanks, specifically the 200 and 300 gallon variety. Thank you!
Unfortunately, we don’t have the warranty information you’ve requested readily available. Please be assured, we stand behind our products, and in the event of a warranty issue with your aquarium, we will honor the terms of the warranty.
Date published: 2017-09-11
Looking at one of your DD tanks
I curently have your 90g reef ready and I don't like the corner overflow; its to large and an eye sore. It seems like the ghost overflow with the bean animal plumbing technique will provide more GPH and little to no noise. Is it possible to get a DD without the corner overflows or have you drill for the reef savy overflow. Thank you.
No, we do not do any custom orders, unfortunately, and no longer make the DD tanks in a non-overflow version.
Date published: 2015-12-28